This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

CLEANCARE WC

  • Posts: 4454
GAS HEATER FLOW RATES....
« on: December 03, 2012, 08:04:03 pm »
Hi I was wondering if anyone has found a gas heater that works on a low flow rate?

I only have a 300L tank and using the L5 it does cain through the water alot quicker than I would like, and will only fire up with a fairly high flow of water through it (this is just how they are)

So what Im after is a gas heater that works on a low flow rate and prefferably available in the u.k. via ebay or whatever?

I will prob get a bigger tank in the spring anyway any suggestions much appreciated.
Logged
WE CLEAN BY FAITH, NOT BY SIGHT WITH WATER FED POLE WHEN WORKING AT HEIGHT.

Mist A Bit

  • Posts: 1032
Re: GAS HEATER FLOW RATES....
« Reply #1 on: December 03, 2012, 09:26:58 pm »
i dont know about ltr per min but i have a fogwash heater and it will fire up on varistream no1 . i personally use no4
Logged

CLEANCARE WC

  • Posts: 4454
Re: GAS HEATER FLOW RATES....
« Reply #2 on: December 03, 2012, 10:14:40 pm »
Logged
WE CLEAN BY FAITH, NOT BY SIGHT WITH WATER FED POLE WHEN WORKING AT HEIGHT.

Mist A Bit

  • Posts: 1032
Re: GAS HEATER FLOW RATES....
« Reply #3 on: December 03, 2012, 10:44:42 pm »
it looks very simular.  i know peter fogwill who i brought it from did test these units out to find out how little flow would fire the boiler up. i cant speak for any other units. I dont think he supplys them now.
Logged

Spruce

  • Posts: 8462
Re: GAS HEATER FLOW RATES....
« Reply #4 on: December 04, 2012, 08:35:09 am »
Hi Cleancare

There was a thread about 2 years ago with Peter Fogwill. He actually tested his heater when asked to advise lowest flow rate that it would consistently ignite and run at.

I searched for ages looking for it with no result. The thread was about how he couldn't understand why a low flow rate was important to some. I'm sure the flowrate figure was less than 1lpm - if I remember it was 0.75lpm, but I can't be sure.

Unfortunately it is no longer relevant as the particular heater is no longer available.
Logged
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

CLEANCARE WC

  • Posts: 4454
Re: GAS HEATER FLOW RATES....
« Reply #5 on: December 04, 2012, 06:36:14 pm »
Quote from: Spruce on December 04, 2012, 08:35:09 am
Hi Cleancare

There was a thread about 2 years ago with Peter Fogwill. He actually tested his heater when asked to advise lowest flow rate that it would consistently ignite and run at.

I searched for ages looking for it with no result. The thread was about how he couldn't understand why a low flow rate was important to some. I'm sure the flowrate figure was less than 1lpm - if I remember it was 0.75lpm, but I can't be sure.

Unfortunately it is no longer relevant as the particular heater is no longer available.

Thanks SPRUCE
Logged
WE CLEAN BY FAITH, NOT BY SIGHT WITH WATER FED POLE WHEN WORKING AT HEIGHT.

cheyne

  • Posts: 8
Re: GAS HEATER FLOW RATES....
« Reply #6 on: December 04, 2012, 06:50:33 pm »
Logged
Pages: [1]