[wightsurf]

Got your email gaz how do i pay for these pay pal??? email if you want ,is there any diy involed ??

Thanks for getting back so soon

Martin

[H h20]

Got your email gaz how do i pay for these pay pal??? email if you want ,is there any diy involed ??

Thanks for getting back so soon

Martin

Martin,iv`e sent you an email,Gaz

[wightsurf]

Thanks Gaz i have emailed you ,,
one of each please
Those brushes seem to have good feed back ,,is it as good a finish not lifting the brush off the glass to rinse.

Martin

[H h20]

Thanks Gaz i have emailed you ,,
one of each please
Those brushes seem to have good feed back ,,is it as good a finish not lifting the brush off the glass to rinse.

Martin

Yes Martin,these brushes are better than any other,the bristles dont stick together as they are slightly crinckled,so much better water flow and dirt does`nt stay on them,
i was talking to a guy today with an Ionics thermopure(hot water)system and his brushes were wrecked,one was only 3 weeks old,he was very impressed with my brushes,and has had a couple,Gaz

[wightsurf]

I will try one Gaz  :
Do you use paypal?
Make easy payment if you got it check email.

[H h20]

Sorry Gaz but need an address to send it.

regards

Martin

It`s on the emails i sent,Gaz

[wightsurf]

Sorry got to learn to read email properly
 : : : : : :

found address :

Martin

[H h20]

Sorry got to learn to read email properly
 : : : : : :

found address :

Martin

No problem Martin,we live and learn  ,Gaz

[wightsurf]

i have found a realy nice sack truck came today,Only took two days to get here .Its about £41.00 all told.
http://www.smarthandling.co.uk/cgi-bin/product_detail.pl?HT1823
The handle has a release catch where you can remove it and i'm hopeing to be able to put the 12v power onto the top of the Bar which supports the wheel axel
>Any ideas on this would be greatfull
But over all i'm pleased with it.
Martin

Ps...... Gaz THanks

[H h20]

i have found a realy nice sack truck came today,Only took two days to get here .Its about £41.00 all told.
http://www.smarthandling.co.uk/cgi-bin/product_detail.pl?HT1823
The handle has a release catch where you can remove it and i'm hopeing to be able to put the 12v power onto the top of the Bar which supports the wheel axel
>Any ideas on this would be greatfull
But over all i'm pleased with it.
Martin

Ps...... Gaz THanks

Hi Martin,you seem to be getting the ball rolling,but i don`t want to put a spanner in the works with this,but you should of gone for this
http://www.mower-magic.co.uk/acatalog/Sack_Trucks.html
i have got this and reccomeneded it to a few others on here and are very pleased with it,if you need any more info on things you have`nt got yet just ask,Gaz 

[wightsurf]

Hi a bit of luck that,the truck i showed in the post,well it's not the same as the one i have just took the rapping off..here at home.It's blue the same colour but it is the same as the red one Gaz has just posted. The top section when you push the two little buttons or what ever you call them together the whole top section comes out or pushes right down.
I think Gods looking after me ,,,well
Just plain lucky i think

Martin

Ps i post it when i start work on it

[H h20]

Hi a bit of luck that,the truck i showed in the post,well it's not the same as the one i have just took the rapping off..here at home.It's blue the same colour but it is the same as the red one Gaz has just posted. The top section when you push the two little buttons or what ever you call them together the whole top section comes out or pushes right down.
I think Gods looking after me ,,,well
Just plain lucky i think

Martin

Ps i post it when i start work on it

Now that`s more than lucky,you could`nt have got yourself a better trolley,if you need any help on how to set it all up with pump,battery etc,just ask,Gaz 

[wightsurf]

Hi
Gaz would be nice if you can tell me how to set it up ect....
Been looking at trying to get the battery on the wheel axel at the back of the foot plate would it bend?
Any pic's anyone who's set up one of these trucks would be nice.

Martin

Ps  Been looking at 12v bat's
It seems that leisure 12V  bat is based on dicharge of 20 hrs,,,so 85 amps / 20 would leave a rate of 4.25 amps hr
But my pump is 6 amps and i only want it on for 7 hours a day so what 12v bat Ah should i go for?

[H h20]

I use a 28 amp hr golf trolley battery,i charge it every day no matter how long i used it,it is nice and compact and it is a gel battery so it can be mounted anyway up,i house it in a couple of palstic containers for protection and it fits perfect on the axle,heres a couple of pics,Gaz

[P @ F]

Hey Gaz , i hope you didnt pay the tiler for your kitchen floor !
He didnt even line those tiles up straight !

      Rich  P @ F

[wightsurf]

Thanks Gaz
Where did you get the battery And how much was it?
Can you send more pic's of the top of your truck where the pump is ect...
most greatfull need ideas on where to put the pump you see and the varistream.
you have placed the battery where i was thinking of putting it ,has it had any prob's sitting on the wheel axel?

thanks   Martin