This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

neil100

  • Posts: 1137
What pure water to waste should I get on my RO system?
« on: January 02, 2006, 08:59:38 pm »
Just running my RO system for the first time.

Have I got the balance right between waste water and pure into tank?64% pure.   36% waste.

IT took 1min 22sec to produce a litre of waste water. And 47 secs to produce 1ltr of pure water to tank.

I live in a soft water area. TDS reading tonight from the tap 97.

Nel
Logged

Jeff Brimble

  • Posts: 4347
Re: What pure water to waste should I get on my RO system?
« Reply #1 on: January 02, 2006, 10:19:50 pm »
It sounds ok its fool proof really the RO membrane does it all. My tds is 50 I leave mine dripping away into the holding tank all night or so.
Logged

Morph

Re: What pure water to waste should I get on my RO system?
« Reply #2 on: January 02, 2006, 10:47:21 pm »
tonight from the tap....

397tds!!!

Logged

gaza

  • Posts: 1642
Re: What pure water to waste should I get on my RO system?
« Reply #3 on: January 02, 2006, 10:56:43 pm »
TONIGHT 365 FROM TAP IN NOTTM

 GAZA
Logged
IM AT THAT AGE MY BACK GOES OUT MORE THAN I DO

gaza

  • Posts: 1642
Re: What pure water to waste should I get on my RO system?
« Reply #4 on: January 02, 2006, 11:00:03 pm »
NEIL  WHOS A LUCK CHAPPY CAN RUN UPTO  8/1 WASTE WATER TO PURE WATER RATIO


  GAZA
Logged
IM AT THAT AGE MY BACK GOES OUT MORE THAN I DO

Andrew McCann

Re: What pure water to waste should I get on my RO system?
« Reply #5 on: January 02, 2006, 11:13:11 pm »
417 tonight :(

Thats a really good ratio of waste to pure Nel.

What is your RO getting your TDS down to?  I take it you are using a DI vessel for a final polish.

Bet ya cant wait to get up and at em with ur new System Nel :)

( tongue in cheek )  .. errr wait for the " b..loo.dy WFP... Its takin me ages.. cant get used to leavin it wet... keep going back to check.. found a run...  its leaving spots stuff  ... 3 months on.. I LOVE this sytem :)

Cheers

Andrew
Logged

gaza

  • Posts: 1642
Re: What pure water to waste should I get on my RO system?
« Reply #6 on: January 02, 2006, 11:28:39 pm »
SPOT ON ANDY ;D

 GAZA
Logged
IM AT THAT AGE MY BACK GOES OUT MORE THAN I DO

Ian_Giles

  • Posts: 2990
Re: What pure water to waste should I get on my RO system?
« Reply #7 on: January 03, 2006, 05:41:03 am »
What R/O system have you got?

That's the highest ratio of waste-pure I have seen, the best is usually 50-50. my own is 33% pure 66% waste.

So well done!


Ian
Logged
Ian. ISM CLEANING SERVICES

sair

  • Posts: 682
Re: What pure water to waste should I get on my RO system?
« Reply #8 on: January 03, 2006, 02:38:05 pm »
i run all my r/o at a 75-80% keep to 20-25 rejection we take it down to about 003-012 depends on where our customers are from they all produce between 4-5.5 liters of pure a minute and it does not matter how high reading you have the only diffeence will be the increase on the tds of the pure but only marginly,
and my suppliers say thats acceptable for the r/o we use
Logged
Essentially Pure Ltd

s.hughes

Re: What pure water to waste should I get on my RO system?
« Reply #9 on: January 03, 2006, 08:54:28 pm »
Neil
I wish I could get a result like yours.

Steve
Logged
Pages: [1]