[Phil @ Extreme Clean]

hi what is the best method of agitation is it the sebo duo or can you get good results manually or take a look at link and tell me if this would be good enough Thankyou.

Phil
Extreme Clean
Carpet's To DRY For!!!

[Colin Day]

I've had a Sebo duo and an Oreck Orbitor... Then I acquired a Host CRB.... The difference is amazing... Don't bother with pathetic little agitators, save up and buy a proper machine....

[Phil @ Extreme Clean]

Cheers Colin i didn't even show the 1 i meant lol i'l put link now just to see, but i was thinking the sebo they look good on clips gonna have to save pennies.

http://www.ebay.co.uk/itm/350472271079?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

[Mike Halliday]

that doesn't have the weight to scrub a carpet , if you push down on it to dig it into the carpet then you'll burn out the motor, it won't do the job you want

[peter maybury]

If you think that you are going to get anywhere near the result with a pile brush or rake compared to a crb machine that costs a lot of money then you are kidding yourself. Obviously a pile brush is going to be better than nothing but always buy the best that you can afford and keep moving forward. The ultimate is a flexi  5 but I have a long shpping list.

Peter
www.carpetleanercardiff.com

[Phil @ Extreme Clean]

Cheers i'l delete that from my ebay watch list lol.

[james roffey]

Used to have the Envirodri gen 4, now use the Host reliant very good machine heavier and bigger than the sebo duo and much easier to change the brushes than the Envirodri

[AshWhite]

I use a 40cm multiwash, and quite often people have said to me after prespraying and agitation: "That was quick, how long will it take to dry?"

If the difference between a brush and sebo duo is 10 fold, the difference between sebo and crb is 100x (in my opinion of course)

Ash

[Simon Gerrard]

Philip,
You have a DF machine, don't you, when not put a drubbing brush on that, job done
Simon

[Phil @ Extreme Clean]

you mean the restore brush it's because i can only get 1 from DF and there nearly £300 with V.A.T iv'e been trying to source 1 from elsewere that fits but no joy.

Cheers Phil.

[Simon Gerrard]

Phillip,
Any scrubbing brush that fits your machine, sod the restore brush.

Simon

[Shaun_Ashmore]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290637004523&category=43526&_trksid=p5197.c0.m619

There you go, bargain!

Shaun

[Phil @ Extreme Clean]

Doesn't look to clever though Shaun abit knackered but don't know if these last allday long also can this be used on any carpet to agitate? or could it cause damage to some and would this be good on blacktop?


Cheers Phil.

[Phil @ Extreme Clean]

Phillip,
Any scrubbing brush that fits your machine, sod the restore brush.

Simon

Thats what i mean i can't get a brush that fits anywere iv'e tried even lost money buying 17" brushes that look like they fit but get them and they don't.

[Simon Gerrard]

Phillip,
Could you not attach a brush to the drive plate on your DF machine

Simon

[Phil @ Extreme Clean]

maybe i could try make something but don't wanna put brushes on that damage the carpet and don't wanna damage mym plate.

[Shaun_Ashmore]

Philip that machine may be old but it's the best contrarotating machine out there and far  better then a host or Gen4 etc (I've had all of them) new ones are on ebay for £1600 which I refuse to pay!

Shaun

[Phil @ Extreme Clean]

well iv'e just found a few alan key bolts on my drive plate i thought it was all solid metal made in 1 but iv'e undone the alan keys and now iv'e took the holding plate off the drive plate and i could fix that to a brush only now i need to know how soft i need the brush to be cause i have one but the bristles are stiff and the weight of my machine on them brushes wish rip a carpet to shreds i think so any suggestions on a 17" brush that will be fine for agitation? and good on blacktop.

[Len Gribble]

Shaun

Starting bid a bit strong, with a bit of tlc I could turn that in £800 and it would like new


Phillip

I’ve tried all the agitator on blacktop dwell is the best

[jim mca]

Phil

Buy the dry fusion brush it my cost more but is designed to do the job you want with your machine if you think its to expensive then try £95+vat for a replacment belt for a flexi 5

Jim