[Kev Martin]

Hope One of You Guys can Help!!!

I have a spare pressure washer very similar to this complete with Hose reel. 

http://www.ebay.co.uk/itm/HONDA-PETROL-PRESSURE-POWER-WASHER-GX390-13-HP-ENGINE-/270769895119?pt=UK_Home_Garden_PowerTools_SM&hash=item3f0b24b6cf



Got it out the other day to find the trigger lance is knac***ed.  any ideas where to get the best a decent replacement?  I think the pressure washer is made by Red something or Devil if it helps and it's deffo a GX390 Engine pushes out 200 Bar ish with around 21 Litres I think.

Kev Martin
Marble Life Ltd

[Griffus]

jetmac sell parts so worth dropping Terry and email: -

pricey2022@hotmail.com

[Matt Gibson]

I've just been put onto a company called exchange engineering.. good prices, helpfull on the phone. or Dual pumps. Got a quality gun/trigger with a swivel pretty cheap..

[BDCS]

Exchange or Malcleanse, I find Suter last best but being German are dearer. I bought my last machine from Wrightway http://www.wrightwayservices.co.uk/ who were very good at building exactly what I wanted (read fussy twat !). That Irish lot said the German engine they sell was a pain and never rang back with a price for the machine I wanted

[Kenny83]

In what way is it knackered mate? the lance should unscrew from the gun so you may only need the gun or the lance, also the nozzles come off if it's just a lance you need... prices are around this...
gun - £15
3 foot lance - £10
nozzles are about a £5er
Or you could buy the whole lot for around £25 - £30
quick release fittings and swivels are extra if you want them... but again you could take your old ones off the existing gun.
All parts are interchangable with most industrial pressure washers
Hope this helps, if you could say whats happening with the lance then I may be able to tell you what you need mate

[Griffus]

Exchange or Malcleanse, I find Suter last best but being German are dearer. I bought my last machine from Wrightway http://www.wrightwayservices.co.uk/ who were very good at building exactly what I wanted (read fussy numpty !). That Irish lot said the German engine they sell was a pain and never rang back with a price for the machine I wanted

Malcleanse - Malcolm is a great guy and will have your stuff out pronto. Call him first thing and you'll have what you need Tuesday am.

[Rob_Mac]

Kevin

I had a trigger that was leaking water all down my leg for a week so I decided that rather than replace it I was going to take it apart.

It just needed tightening up in the handle assembly.

Saved a few quid!!

Rob