This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

mark bowditch

  • Posts: 142
Pressure washing paving with gravel joints
« on: August 30, 2011, 08:18:55 pm »
Pressure washing paving with gravel joints is about 20 mm joints with small gravel
Would a flat surface cleaner be ok any advice appreciated
Thanks
Mark
Pressure Washing and Maintenance
http://www.grimeforce.co.uk

Alan McTernan

  • Posts: 574
Re: Pressure washing paving with gravel joints
« Reply #1 on: August 30, 2011, 08:52:01 pm »
Hi Mark,

Good Luck ;)

The best way i find to deal with these and gravel borders is to have a strip of exterior ply in the van that i stand on at the edge i am cleaning (with a lance), hence not blowing the gravel everywhere!!!

Hope this helps. ;)

Regards
Alan

mark bowditch

  • Posts: 142
Re: Pressure washing paving with gravel joints
« Reply #2 on: August 30, 2011, 09:13:28 pm »
Hi Alan
Thanks for the reply it is random lay with gravel joints instead of pointing don’t fancy sticking a board round that lot might be quicker to vacuum up the gravel in the joints.
Did you get my e-mail in April about your website?
Regards
Mark
Pressure Washing and Maintenance
http://www.grimeforce.co.uk

JSMC

  • Posts: 3511
Re: Pressure washing paving with gravel joints
« Reply #3 on: August 30, 2011, 10:18:59 pm »
i vacuumed gravel up other week when doing a job