[mac74]

 Has anyone got any info on these, as there is NOTHING    on aqau tecs website about the spec? Can they run a two pump 2 reel setup? Any1 know if they are any good? I DONT know why theres no info on them   Thanks m

[Dave Willis]

Fogwash is on Peter Fogwells site. Give him a ring?

[mac74]

Fogwash is on Peter Fogwells site. Give him a ring?

Yes i can see it on his site, but there is no info on there about them? thanks m

[steven ainger]

Doubt you can run 2 reels,
So what info do you want ??

[Roy Harding]

We run 2 reels of 1/2 tricoflex no problem at all.

Roy

[Spruce]

Hi Roy
Please can you tell us where you got your last stainless steel roof vent from, how far does it protrude above the van's roofline as does it prevent rain water from getting into the flue. Also what diamt flue pipe did you use to connect it as I saw a picture you posted of a reducer you bought. Can you also please tell us what the heaters overall length is.
Thanks for your assistance.
Cheers
Spruce

[mac74]

Is it a case of just plugging a single hose from my shurflo into the hotwash then into the hose reel? Or  could i put two pump feeds into a single reducer in, and then the same out, into 2 reels (8mm minibore)? and does the heater detect water flow and switch off and on every time i turn on my hose tap? How reliable is the temp setting, is it safe on glass in cold weather at say hand warm? If i did run two reels i would imagine i would have 2 raise the temp up when the 2 are running, but then if one man turned his tap off would the temp then rise to a to hot temp on the glass in the cold? THANKS M

[LBWCS]

Just got one last week.was also frustrated on the lack if info on peters website.having said that postage was the next morning, very swift!used it for a few days now and I am impressed.very sturdy, always fired up (unlike l5) and gets really, really hot! Flow rates are way way lower than l5 also

[Dave Willis]

I too have a Fogwash. Even when you buy it you'll have very little info but having said that it's so simple to use. Water in water out and a gas supply. Ignition runs off batteries. Roy posted a few pics and did a good job. I changed my hose to reel for radiator hose. Works ok for me. It really needs a flue but can be run if the doors are open.

[steven ainger]

Does the fogwash have a 17min timeout style cutoff, like the l5 has

[Dave Willis]

Nope

[Richard 01903]

Help please How do you get hold of one of these, I cant find web site.Has anyone got a link or number please :

[Dave Willis]

Google window-tools

[steven ainger]

http://www.window-tools.com/

Top left, theres a buy it now logo,

[Frankybadboy]

someone wake peter up......................

[Roy Harding]

Hi Roy
Please can you tell us where you got your last stainless steel roof vent from, how far does it protrude above the van's roofline as does it prevent rain water from getting into the flue. Also what diamt flue pipe did you use to connect it as I saw a picture you posted of a reducer you bought. Can you also please tell us what the heaters overall length is.
Thanks for your assistance.
Cheers
Spruce

I will post some measurements tonight and some photos.

Roy

[Spruce]

Hi Roy
Please can you tell us where you got your last stainless steel roof vent from, how far does it protrude above the van's roofline as does it prevent rain water from getting into the flue. Also what diamt flue pipe did you use to connect it as I saw a picture you posted of a reducer you bought. Can you also please tell us what the heaters overall length is.
Thanks for your assistance.
Cheers
Spruce

I will post some measurements tonight and some photos.

Roy

Hi Roy
Thanks. Pity Peter hasn't got it all covered.
Spruce

[steven ainger]

I'll let you all know what the fogwash is like next week, as ive just ordered one.
Fancied a change from my l5 , also wanted a heater with a flue

[Pure Glass]

Lads-followed this post closely-one question

Could I incorporate a fogwash with a pre freedom 650 van mount? How would I do it

Ta, Steve

[PureClean Window Cleaning Ltd]

i recommend them, although mine did stop working, but discovered a reset button on top of the unit. ok now. its takes 1/2" thread so quite easy to plumb in. i use 15mm pipes. make sure you plumb in after resin barrels as i melted mine! well warped. still work though.