Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Ionic poles - who supplies their hose fittings?
« on: October 15, 2005, 08:34:02 pm »
I've two Ionic poles; 18 ft and 4 ft.  At the end of the hose from the brush head is a male-brass fitting that fits a female hoselock (hozelock?) connector.

The good thing about them is that they connect a thin peice of hose to a garden-sized hose - via an easily available hoselock.

Does anyone know where I can buy these from?  I've googled; honest; but no luck. 

 

poles apart

  • Posts: 664
Re: Ionic poles - who supplies their hose fittings?
« Reply #1 on: October 15, 2005, 08:38:04 pm »
ionic?

Re: Ionic poles - who supplies their hose fittings?
« Reply #2 on: October 15, 2005, 08:48:55 pm »
ionic?

You're not being helpful!  I've googled.  Can't find any hose fittings to fit a hoselock.  Plenty of sites sell the poles; but it's the brass fitting that conects to a female hoselock conection I'm after.

 >:(

poles apart

  • Posts: 664
Re: Ionic poles - who supplies their hose fittings?
« Reply #3 on: October 15, 2005, 08:53:41 pm »
Sorry,I was trying to be helpful, honest! ;) What i meant was why don't you just buy them from Ionic. The time and energy you'll waste trying to source them from elsewhere won't save much, you could be spending that time with Wor Lass!
Rod

Re: Ionic poles - who supplies their hose fittings?
« Reply #4 on: October 15, 2005, 09:00:30 pm »
I work with Wor Lass.  I don't want to spend anymore time round her than what's absolutely required.

I'm just after one or two of the brass conections, that connect a thin hose to a garden-sized hose; via hozelock.

matt

Re: Ionic poles - who supplies their hose fittings?
« Reply #5 on: October 15, 2005, 09:39:01 pm »
tosh, if you get any joy, then i would be interested in some :)

Roy Harding

  • Posts: 1973
Re: Ionic poles - who supplies their hose fittings?
« Reply #6 on: October 15, 2005, 09:45:49 pm »
Hi Tosh

Give Ocean Bussiness suplies a ring 0290795400

They sell every thing I would also order the white Y conectors at the brush head, as they do get brittal.

They will post them.

Roy :)

poles apart

  • Posts: 664
Re: Ionic poles - who supplies their hose fittings?
« Reply #7 on: October 15, 2005, 09:48:32 pm »
Hi Tosh

Give Ocean Bussiness suplies a ring 0290795400

They sell every thing I would also order the white Y conectors at the brush head, as they do get brittal.

They will post them.

Roy :)

Ocean supplies are a distributor for Ionic Systems

Re: Ionic poles - who supplies their hose fittings?
« Reply #8 on: October 15, 2005, 10:01:25 pm »
Thanks, Roy.  I'll give 'em a bell on Monday. 

I'll now bore you with detail.

What it is, I've got three poles.  A Peter Fogwill 30 foot pole, and two Ionics poles; 18 ft and 4 ft.  Both the Ionics poles fitted my pump system, but I had no conection for the Peter Fogwill pole and hose.

So I took the connection from the 4 ft pole and attached it to the Peter Fogwill 30 ft hose and pole so I could do that farm-house job.

But, I want the 4 ft pole for Wor Lass for when we do the Abbey Hotel next (lots of ground floor leaded windows I can just point her at); so I need another connection quick(ish).  I could just swap the bit back again; so there's no emergency.


thewindowcleaner1

  • Posts: 779
Re: Ionic poles - who supplies their hose fittings?
« Reply #9 on: October 15, 2005, 10:08:08 pm »
Ionic do sell the fitting you're after it's not on the web site but is in thier catalogue about £3.

The secret is not doing as you like but liking what you do
www.thewindowcleaner.biz

Roy Harding

  • Posts: 1973
Re: Ionic poles - who supplies their hose fittings?
« Reply #10 on: October 15, 2005, 10:12:08 pm »
Hi Tosh

I have done the Abey years and years ago with my Brother in law, we did it inside and out every 4wks.

I saw this company at the NEC they make the poles.

http://www.exelindustry.net/portal/english/products_by_brand/exel_universal_telescopic_pole/

Roy

Re: Ionic poles - who supplies their hose fittings?
« Reply #11 on: October 15, 2005, 10:24:02 pm »
Hi Tosh

Is the pic below what you are looking for?

£3 + Vat and probably a couple of quid postage from Ionics, I usually have a couple spare, but I have had a look and I cannot locate them.

If you where to order Monday morning, you should have it by Tuesday.

Andrew

matt

Re: Ionic poles - who supplies their hose fittings?
« Reply #12 on: October 15, 2005, 10:26:32 pm »
what size pipe does the barb take ?? ? ??

Re: Ionic poles - who supplies their hose fittings?
« Reply #13 on: October 15, 2005, 10:27:01 pm »
Hi Tosh

I have done the Abey years and years ago with my Brother in law, we did it inside and out every 4wks.

Roy

I bet you groaned, the same as we do, as there's loads of leaded windows!

I'm looking forward to it with WFP now though (not the insides).


Roy Harding

  • Posts: 1973
Re: Ionic poles - who supplies their hose fittings?
« Reply #14 on: October 15, 2005, 10:33:12 pm »
Tosh

It did make me smile ;D ;D ;D

I also used to do Davied Brooms place at Caldicot.

Have you ever tried Mitel?

Roy

Solo Cleaning

  • Posts: 71
Re: Ionic poles - who supplies their hose fittings?
« Reply #15 on: October 15, 2005, 10:42:23 pm »


They sell every thing I would also order the white Y conectors at the brush head, as they do get brittal.

Roy :)

I was recently in B&Q. If you find the section where they sell rope and polypipe they also sell packets of various pipe connectors. Straight T joint Y joints. They come in mulipacks at about £3. They are also in various barb sizes 4,6,8 mm I think. I bought a couple of packs and I have switched them on Peter Fogwills brush head to replace the metal connectors

Lee

ian m

  • Posts: 136
Re: Ionic poles - who supplies their hose fittings?
« Reply #16 on: October 16, 2005, 11:20:16 am »
wintecs also do their aluminium version of the same thing.

http://wintecs.co.uk/catalog/index.php?cPath=58_56_65

Regards

Ian
I know you are out there....... I can hear you breathing