[PureClean Window Cleaning Ltd]

my shurflo pump has stopped working, the light is on, on the controller but no noise, so im presuming its the pump, but cant find  the right replacement online,

its serial no - 8002-793-238 - 100psi - 6.4 lpm, 7amps

all i can find is 5lpm (litres per min) will that be ok for 2 man set up?

ta guys

[L.J.Thorpe]

not being patronising but have you cleaned out the inline filter

[alanwilson]

you don't need to replace it.

open the pump motor body up (6 screws at top) and slide the motor out.  You'll see that one of the magnets has come loose and needs re-glued to the motor body.  When pushing the motor back in you need to hold the brushes back - fishing line works best, hold both ends between your fingers looped over the motor brush, and once you have it in place you just slide the line out.

you're welcome.

[alanwilson]

the other thing to check if the magnets are in place is the bearing between the motor shaft and the cam, just check its not seized but I'mm 99% confident its the magnet.

[PureClean Window Cleaning Ltd]

Thanks alan, i will give that ago before i shell out £80

[PureClean Window Cleaning Ltd]

not being patronising but have you cleaned out the inline filter

ive checked that

[AuRavelling79]

Don't presume it is the pump before by-passing the controller and putting electrical feed directly to the pump.

[PureClean Window Cleaning Ltd]

Ive had it apart and cant see anything wrong with it, theres a seperate section on top of the pump that has a spring in it, but  that seems fine, ive looked in the controller and the fuse is ok, but there is a brown deposit near where one of the wires is screwed in where it looks like it could have blown?

might be best i get a caravan guy to look at it, as they fit these to caravans

[Seymour Sunshine]

Oh, for goodness sakes. Why lose a day's work to save £80? Buy a new pump and get out there working. Why lose time b****ring about with an old pump?

If you can fix the old one, keep it as a spare.

[Sean Dyer]

exactly

i buy a new van every other week

dont want it breaking down on me

[dave.e]

my shurflo pump has stopped working, the light is on, on the controller but no noise, so im presuming its the pump, but cant find  the right replacement online,

its serial no - 8002-793-238 - 100psi - 6.4 lpm, 7amps

all i can find is 5lpm (litres per min) will that be ok for 2 man set up?

ta guys

try this one mate   
http://www.wintecs.co.uk/catalog/Water+Fed+Components-Pumps+and+Controllers/c126_79/p566/Shurflo+Pump+12v+060psi+-+6.8Lpm+3/8ff/product_info.html

[Seymour Sunshine]

exactly

i buy a new van every other week

dont want it breaking down on me

If you can earn in a day the cost of a new van or more, then that makes perfect sense.

Otherwise it's a rather silly comment.

[richard jagger]

Its never silly to fix same thing first but don't waste time .
Try this pump they are good and reasonable price.
http://www.vyair.com/scripts/prodList.asp?idCategory=31

[PureClean Window Cleaning Ltd]

Oh, for goodness sakes. Why lose a day's work to save £80? Buy a new pump and get out there working. Why lose time b****ring about with an old pump?

If you can fix the old one, keep it as a spare.

you dont just buy something quite expensive on the off chance, that is the problem, i needed to make  sure it wasnt something else. anyway ordered one off cleanspot, will try and get two set up so im not left in this problem again!

[PureClean Window Cleaning Ltd]

Its never silly to fix same thing first but don't waste time .
Try this pump they are good and reasonable price.
http://www.vyair.com/scripts/prodList.asp?idCategory=31

thanks will try them next time

[Sean Dyer]

exactly

i buy a new van every other week

dont want it breaking down on me

If you can earn in a day the cost of a new van or more, then that makes perfect sense.

Otherwise it's a rather silly comment.

Yeah, my comment was silly...