[jonboywalton75]

I,ve only used it for 3 days, here are the +'s & -'s

-'s
1 Weight, a noticeable difference on my SLX, part of that is probably using the microbore as pole hose.
2 Seems flimsy, time will tell
3 Takes some getting used to. After a while the pulling action gets easier, once again this could be because i'm pulling on microbore.
4 Closed length, now a bit more awkward on downstairs windows
5 Slower extending pole, rectus fitting catching on butt cap as microbore goes up pole.
6 Expensive, but the developement must have been expensive

+'s
1 No loop of pole hose
2 Not tethered to pole at holster on belt
3 No wet legs
4 Apparently the customer service is excellent
5 I think it will speed me up even more

Overall i would say that if it lasts i will keep it on my slx, but i've bought an extreme brush to lower the weight.
I can see why it's won awards and so far i think that the plusses make up for any niggles.
btw thanks to Tosh for putting me onto the flipfast, i,ve ordered three.

[CLEANCARE WC]

i did the cheapo option and bought 2 quick release clamps from the bike bizzle on ebay altough they only sent one   £2.50 each work brilliant

[Lee GLS]

I,ve only used it for 3 days, here are the +'s & -'s

-'s
1 Weight, a noticeable difference on my SLX, part of that is probably using the microbore as pole hose.
2 Seems flimsy, time will tell
3 Takes some getting used to. After a while the pulling action gets easier, once again this could be because i'm pulling on microbore. its easier pulling on the microbore because there is no stretch with it, the yellow hose they supply stretches a little as you pull is so it needs pulling harder to compensate.

4 Closed length, now a bit more awkward on downstairs windows
5 Slower extending pole, rectus fitting catching on butt cap as microbore goes up pole. thats not the fault of the aqua dapter, i use this method and its not long before you get the hang of it.

6 Expensive, but the developement must have been expensive

[Pole 2 Pole]

i did the cheapo option and bought 2 quick release clamps from the bike bizzle on ebay altough they only sent one   £2.50 each work brilliant

Me too bud. Ordered 2. Sent one. Cheeky sods. Seems more than a coincidence then. Waited best part of a week to receive it too. Emailed them about 6 hours ago but ain't heard back yet. Deffo trying it on. I feel sone serious negative feedback coming on if he don't sort it  

[CLEANCARE WC]

i did the cheapo option and bought 2 quick release clamps from the bike bizzle on ebay altough they only sent one   £2.50 each work brilliant

Me too bud. Ordered 2. Sent one. Cheeky sods. Seems more than a coincidence then. Waited best part of a week to receive it too. Emailed them about 6 hours ago but ain't heard back yet. Deffo trying it on. I feel sone serious negative feedback coming on if he don't sort it  

yep waited best part of a week too. i think i will email them too

[colin purewater]

i did the cheapo option and bought 2 quick release clamps from the bike bizzle on ebay altough they only sent one   £2.50 each work brilliant

please explain how the cheapo one works for £2.50 please? intrested!!!!!!!!!!!!

[CLEANCARE WC]

NOW PAY ATTENTION ITS VERY COMPLICATED    you simply take the bolt and wheel bit off the angle adapter and replace with the quick release clamp which is a bolt with a nut one end and the cllamp the other, you just turn the nut to get the right tension for the quick clamp to lock and unlock. 2 minute job. if you already have the angle adapter you save quite a bit.

[DaveG]

Whats that got to do with the Aquadapter???

[Pole 2 Pole]

Nothing at all......but it's the weekend. So who cares 

[Gav Camm lammy 283]

did tell u jbw not to bother
seems im right 

[Pole 2 Pole]

I didn't have a clue how to adapt it but it took me about a minute to figure it out and I'm a thicko. But like tosh said....it's surprisingly good 

[Seymour Sunshine]

NOW PAY ATTENTION ITS VERY COMPLICATED    you simply take the bolt and wheel bit off the angle adapter and replace with the quick release clamp which is a bolt with a nut one end and the cllamp the other, you just turn the nut to get the right tension for the quick clamp to lock and unlock. 2 minute job. if you already have the angle adapter you save quite a bit.

He means it's one of these

[Smudger]

yes i think some have got their wires crossed !!!

Had the Ad for over a year now - cant fault it, but you would be better using their pole hole and pulling that rather
than the microbore.

as Lee pointed out - you cant blame the AD for your hose catching inside the pole.

Lee - been using Ariel Brush this week -   

Darran

[CLEANCARE WC]

Apologies for the thread hijack

[Pole 2 Pole]

Dude. Will you let me know if you receive an email. I will let you know if I do. I got a feelin we may not.

[CLEANCARE WC]

will do mate. I emailed them this afternoon also

[Pole 2 Pole]

Cheers bud.

[Lee GLS]

yes i think some have got their wires crossed !!!

Had the Ad for over a year now - cant fault it, but you would be better using their pole hole and pulling that rather
than the microbore.

as Lee pointed out - you cant blame the AD for your hose catching inside the pole.

Lee - been using Ariel Brush this week -   

Darran

I take it you liked it Darren   Did you fit fan jets to it?

[Smudger]

yes i have and i will post a review shortly 

Darran

[EandM]

Clearly I'm missing something here but how is this easier / better / more convenient than a trigger?