[H2O TECH]

Hi
Looking to produce 300L per day what RO and what DI size would be recommended, I was thinking 100 US gallon one, but Di i dont know, 700ml or 10 llrs one? Any advice welcome.

Cheers

[p1w1]

if you want 300lt a day if it was me i would opt for a 200 gpd ro probably hardly any more expensive and it covers you incase you need more in the future, as for di i think you can get 7lt ones and i would reckon that would be just fine for your needs, size not really all that important to a point just means the bigger vessel you have the less times you have to change the resin..

paul

[H2O TECH]

7l or 700ml vessle?

cheers

[gto]

no don't get a 200GPD.

get something like the VYAIR 450gpd RO and 11l DAQUA DI.

i had a 200gpd RO it produced 12L per hour

VYAIR RO produces 50L per hour.

[p1w1]

7l or 700ml vessle?

cheers

it depends where you keep it all if  your producing the water in the van where you want to keep weight down to a minimum then for me personaly a 7 litre vessel will be fine for the amount you want to produce and wont need changing too often if its in a garage or lockup then i would get as big as you can afford..as for ro there must of been a problem with the above posters ro as it should do better then that but he has a point try and get a decent one that can produce the water quicker and think a bit into the future regarding the amount you want to produce even a 300 gpd day would be better.

[H2O TECH]

http://www.soapnational.co.uk/acatalog/RO_UNITS.html
does that RO system loook ok? and if I get 10-11L DI

[gto]

the vyair is the same price, and is a 450gpd. with 2 booster pumps.

[H2O TECH]

will look into it :-)