[cc]

Has anyone found a way or anything suitable to extend the harris pole?

[LWC]

Also forgot to add...once youve fitted these plastic collars, you just swap them to your next one and so on and so on 

[Jeff Brimble]

Has anyone found a way or anything suitable to extend the harris pole?

No1 section Unger fits inside the No1 section Harris.( A few wraps of tape will wedge it in but not adjustable).
 No4/5section fits outside the base section of the Harris and is adjustable.

[richard jagger]

I have a harris that extends to 27 foot and also made a 4 foot short pole for ground floor cleaning. You can also make a 18 inch goose neck out of a Polex aluminium- crank, with flip release for quick action and adding a black flexi goose neck to the end it will get into many positions.At this point your harris is 28.5 long.The Harris Killer pole is born.

[mikecam]

Theres 2 people

Make that 3 !!! I'm converted 

[JSMC]

I have a harris that extends to 27 foot and also made a 4 foot short pole for ground floor cleaning. You can also make a 18 inch goose neck out of a Polex aluminium- crank, with flip release for quick action and adding a black flexi goose neck to the end it will get into many positions.At this point your harris is 28.5 long.The Harris Killer pole is born.

more info plese

[LWC]

Theres 2 people

Make that 3 !!! I'm converted 

More like 7 now...getting there slowly   

[Davie T]

What supermarkets stock the Harris pole ?

[DaveG]

Supermarkets? B and Q do them

[Tom White]

For routine run of the mill domestic two story (ground and first floor) work, the Harris is the best budget pole.  I never bought just one; I'd buy two at a time (for £15 I may as well) and each one would last me about six months.

[Slash]

My Harris pole lasted me 3 weeks before the clamps play up,they get really tight!

[JUST GUTTERS]

this has been said before..dont use the clamps....extend pole...hold the hose and pole at the bottom of the pole this will keep it up. when finnished release pole hose and pole slides down..keep clamps for awkward jobs were needed.

[LWC]

My Harris pole lasted me 3 weeks before the clamps play up,they get really tight!

Mine last over a year every time, leave about an inch or 2 where the you tighten the clamps up so youve got something to loosen off. You only have to "nip" them up to use them.

[C.C.S.]

i've always used harris poles they are very good value.the only thing that bothers me is the grey hands

[LWC]

i've always used harris poles they are very good value.the only thing that bothers me is the grey hands

Get some black insulating tape and wrap it up then.

[JSMC]

closed length?

[richard jagger]

You can get a 32mm I D  insulation tube from the plumbing shops that will slide over the bottom of a harries pole with the help of a silicon spray. This will provide a worm pole and a good grip if raped with electric tape. I also put some plastic glue on the ends of this tube and pull tight with some tie wires to form a round soft end . 

[Tom White]

This will provide a worm pole and a good grip if wrapped with electric tape.. 

I'm no spelling and grammar Nazi, but you really needed that 'w' and 'p' there!

[LWC]

This will provide a worm pole and a good grip if wrapped with electric tape.. 

I'm no spelling and grammar Nazi, but you really needed that 'w' and 'p' there!

Whats this worm as well?

[DaveG]

this has been said before..dont use the clamps....extend pole...hold the hose and pole at the bottom of the pole this will keep it up. when finnished release pole hose and pole slides down..keep clamps for awkward jobs were needed.

Sorry mate , dont get what you mean