This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

ericholl1

  • Posts: 2
WHIRLAWAY SERVICING REQUIRED
« on: April 19, 2011, 10:52:54 pm »
Can anybody tell me where I can get my whirlaway flat surface cleaner's serviced please?

I have a 18" and a 16" both passing water, I have fitted new top hat and seals, but still passing water.
Thanks Eric. :)
Logged

Blast Off Stoke

  • Posts: 119
Re: WHIRLAWAY SERVICING REQUIRED
« Reply #1 on: April 20, 2011, 07:21:52 am »
what do you mean in passing water ?
Logged

Blast Away

Re: WHIRLAWAY SERVICING REQUIRED
« Reply #2 on: April 20, 2011, 07:31:55 am »
If you used vacuum recovery mate then you wouldn't be passing much water.
 ;D
Logged

Matt Gibson

  • Posts: 2482
Re: WHIRLAWAY SERVICING REQUIRED
« Reply #3 on: April 20, 2011, 11:07:13 am »
listen to you, with your fancy vacuum recovery!  ;D
Logged

Blast Away

Re: WHIRLAWAY SERVICING REQUIRED
« Reply #4 on: April 20, 2011, 10:53:01 pm »
Quote from: Matt Gibson on April 20, 2011, 11:07:13 am
listen to you, with your fancy vacuum recovery!  ;D

I don't have vac recovery mate.  ;D
Logged

ericholl1

  • Posts: 2
Re: WHIRLAWAY SERVICING REQUIRED
« Reply #5 on: April 22, 2011, 11:15:28 am »
Quote from: pressure washable on April 20, 2011, 07:21:52 am
what do you mean in passing water ?

The rotary arm is not spinning and water is coming out the sides of the rotary cylinder.

Thanks Eric.
Logged

Blast Off Stoke

  • Posts: 119
Re: WHIRLAWAY SERVICING REQUIRED
« Reply #6 on: April 22, 2011, 03:05:56 pm »
presuming both nozzles are not blocked then Your rotary pipes may have a fracture in them or the cylinder may be split.If its like mine the rotary arms unscrew from the cylinder,look for a hairline crack at the ends near the cylinder.Parts are available but i think you have too buy the complete set - cylinder and arms.
Phone whoever you got it off  for parts.
Logged

TVCS

  • Posts: 884
Re: WHIRLAWAY SERVICING REQUIRED
« Reply #7 on: May 04, 2011, 11:01:35 am »
mine has a similar problem.  The nozzles are clear and they do turn (slowly) but water is squirting out of the hole in the cylinder.  Any thoughts?
Logged
Veni, vidi, vino, splatus.

 (I came, I saw, I drank, I fell over...)

drive surgeon

  • Posts: 2812
Re: WHIRLAWAY SERVICING REQUIRED
« Reply #8 on: May 05, 2011, 08:56:38 pm »
LADS I HAVE HAD ALL SORTS OF PROBLEMS OVER THE YEARS BUT I KNOW HOW TO SOLVE THEM ALL!!  I HAVE USED MINE FOR 9 YEARS.  IF WATER COMES OUT THE GREASE HOLE UNDERNEATH THEN THE O RING HAS GONE!  IF NO WATER IS COMING OUT THAT HOLE AND SPRAY ARM IS NOT SPINNING THEN YOU NEED TO TAKE NOZZLES OFF, CLEAR THEM OUT WITH A PIN IF BLOCKED THEN PUT PTFE TAPE ON THREAD AND TIGHTEN BACK UP MAKING SURE THE LINE ON THE NOZZLE IS IN LINE WITH SPRAY BAR OR IT WONT CLEAN PROPERLY!

YOU DONT NEED TO PAY SOMEONE TO SERVICE IT!!

ANY QUESTIONS JUST ASK!
Logged

drive surgeon

  • Posts: 2812
Re: WHIRLAWAY SERVICING REQUIRED
« Reply #9 on: May 05, 2011, 09:02:36 pm »
Logged
Pages: [1]