Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

drive surgeon

  • Posts: 2812
turbo nozzles thoughts
« on: March 12, 2011, 02:00:39 pm »
hi guys, do you notice any differance in turbo nozzles?  been getting mine from tech clean lately but im not convinced. instead of a nice conical shape from them they seem to be what i descirbe as a vibrating cone and dont seem as powerfull. its not the filter blocked as i have checked. and when using im suffering from a lot of vibrations. yet when i put the spray fan lance on there is hardly any vibrations. so it must be the type of turbos im ggetting cos i never used to suffer this bad with aching right arm and numb hand?  they are only about £40 i think. has anyone else noticed the same thing? or can you recommend the top of the range model?  rather pay the extra than suffer and get white finger etc.  ???

Ged

  • Posts: 315
Re: turbo nozzles thoughts
« Reply #1 on: March 12, 2011, 03:56:54 pm »
are these the small red ones  from tech clean ? if so not had problem with them but have to clean in line filter after each job to keep optimal performance. they used to do a larger black one which was very good.

drive surgeon

  • Posts: 2812
Re: turbo nozzles thoughts
« Reply #2 on: March 12, 2011, 06:07:15 pm »
well one of them is a red one and one is blue. the old black one never had so much vibration in the lance. i have cleared the filters in both so it cant be blockages and the blue one is new.  ???

jaespray

  • Posts: 333
Re: turbo nozzles thoughts
« Reply #3 on: March 12, 2011, 10:48:14 pm »
i would like to see a fsc with turbo nozzles fitted
regards john

drive surgeon

  • Posts: 2812
Re: turbo nozzles thoughts
« Reply #4 on: March 14, 2011, 11:49:00 am »
i wonder if its something to with the cone inside the head? im not sure if i can take these apart tho. without a vice anyway.

Alan McTernan

  • Posts: 574
Re: turbo nozzles thoughts
« Reply #5 on: March 14, 2011, 07:37:54 pm »
Hi DS,

I have taken the filters out of my turbo lances as are a pain in the arse (not sure if this is ok) but have both been ok so far (touch wood) ;)

Regards
Alan

Blast Away

Re: turbo nozzles thoughts
« Reply #6 on: March 14, 2011, 07:56:22 pm »
Turbos's need to be matched to your pump. It's not always the case of any will work right with any pump.

Also open up the nozzle and check if the ceramic isn't chipped.

jaespray

  • Posts: 333
Re: turbo nozzles thoughts
« Reply #7 on: March 14, 2011, 08:06:51 pm »
any & all nozzles should be matched to  pressure   flow rate   and most importantly to what you wash
regards john

drive surgeon

  • Posts: 2812
Re: turbo nozzles thoughts
« Reply #8 on: March 14, 2011, 08:42:04 pm »
yeah i know all that guys thanks. my pump is 15 litres a minute i have been told by malcleanse and dual pumps that i need to use 04 turbo nozzles. im sure jan would have sent me the right ones as its her machine i use. but im not happy with them. too much vibration, loss of pressure, not a smooth cone shape with them.

Blast Away

Re: turbo nozzles thoughts
« Reply #9 on: March 14, 2011, 09:01:06 pm »
any & all nozzles should be matched to  pressure   flow rate   and most importantly to what you wash
regards john

 :-\

Blast Away

Re: turbo nozzles thoughts
« Reply #10 on: March 14, 2011, 09:05:50 pm »
yeah i know all that guys thanks. my pump is 15 litres a minute i have been told by malcleanse and dual pumps that i need to use 04 turbo nozzles. im sure jan would have sent me the right ones as its her machine i use. but im not happy with them. too much vibration, loss of pressure, not a smooth cone shape with them.

Get your pump checked then.

jaespray

  • Posts: 333
Re: turbo nozzles thoughts
« Reply #11 on: March 14, 2011, 09:07:16 pm »
if you are not happy  your work wont be good   this season has just started   so get your self & equipment sorted   dont let the side down  i can only speak fom buying from dual pumps    they have massive stocks   if the have not got it   they can get it if its there    as blastAway says there could be a chip or flaw in the ceramic the eye cant see
regards john

jaespray

  • Posts: 333
Re: turbo nozzles thoughts
« Reply #12 on: March 14, 2011, 09:14:02 pm »
any part of your equipment could of been damaged by frost      DONT use ptf tape on any threads  USE loctite
regards john

drive surgeon

  • Posts: 2812
Re: turbo nozzles thoughts
« Reply #13 on: March 14, 2011, 09:30:08 pm »
its a brand new machine. and the whirlaway and fan lance work fine.

jaespray

  • Posts: 333
Re: turbo nozzles thoughts
« Reply #14 on: March 14, 2011, 09:46:29 pm »
well throw that turbo nozzle away       you should have a new nozzle by now from when you first noticed it     dont you carry spares
regards john

Steve peel

  • Posts: 54
Re: turbo nozzles thoughts
« Reply #15 on: March 14, 2011, 10:52:53 pm »
well throw that turbo nozzle away       you should have a new nozzle by now from when you first noticed it     dont you carry spares
regards john

John
Got some new heavy duty turbo nozzle heads coming in on thursday giz a ring .05 and 055 nozzle sizes to fit my 2 machines

Steve

BDCS

  • Posts: 4777
Re: turbo nozzles thoughts
« Reply #16 on: March 14, 2011, 11:38:58 pm »
DS if you've got a problem with the gear Tech clean have supplied take it up with them. Turbo nozzles are consumables just like broom heads and handles - you know where I'm coming from. Last year it was the unloaders you were moaning about - why do you have to have an autopsy on everything before you dip your hand into your wallet and buy essentials of your trade ? Buy yourself a new broom ::)

jaespray

  • Posts: 333
Re: turbo nozzles thoughts
« Reply #17 on: March 15, 2011, 12:12:29 am »
i have only my broom for "thirty years" still as good as the day i bought it
only had 8 heads & 6 handles

BDCS

  • Posts: 4777
Re: turbo nozzles thoughts
« Reply #18 on: March 15, 2011, 12:15:08 am »

jaespray

  • Posts: 333
Re: turbo nozzles thoughts
« Reply #19 on: March 15, 2011, 12:22:37 am »
hi bdcs nearly as good fork handles or was it four candles   2ronnies
regards john