[neiljoust]

when i have to use the pole to clean windows (visa/versa) when i sqeggee it leaves a strip off water down the glass then it drys white whats the best way to get rid off this thanks

[DaveG]

Do you mean down the edge? If its down the middle you need to change rubber. Scrim will do it

[mci services]

practise until you don't leave a line. tilt the squeegie to a very slight angle and it will not happen and overlap your pulls

[neiljoust]

down the middle its got a new rubber in after every down stroke i touch it on another bit of glass to get rid off excess water if i change to gg4 soap will the line dry clear i live in a hard water area thank you

[mci services]

down the middle its got a new rubber in after every down stroke i touch it on another bit of glass to get rid off excess water if i change to gg4 soap will the line dry clear i live in a hard water area thank you

check there isn't a bit of grit behind the rubber and the channel, also check for even a hair can do that. and make sure it doesn't have a nick in the blade, no point changing soap until you fix the problem

[neiljoust]

just about to buy a angle tool its a unger pole with visa versa on it how are they or is there better out there

[A & J Owen Window Cleaning]

yeh mate get the unger pole you can angle the blade better the problem you have is dirt between the channel and the rubber

[neiljoust]

i have a unger pole but need to get the crank joint is that right thanks

[Ian101]

easy ... just wipe the rubber with ur cloth in between strokes

[the bfg]

easy ... just wipe the rubber with ur cloth in between strokes

spot on Ian.

[David Kent @ KentKleen]

just get a wfp on the job