[expro]

For those in doubt and for your information.
The method of use of Clensan has now changed and it
should not be mixed with Chrystal Green .

Prochem now state that Clensan should not be mixed with
any other detergents. 

[See Prochems safety data sheets]
Expro

[Peter Sweeney]

 

[markpowell]

It seems to change often, the first lot i can remember was to be sprayed and left, then the second lot was leave 20 mins and extract, seems its changed again now.
I use it often and just put in tank with fab fibre rinse for extraction.
Mark

[expro]

Mark I think you will find that mixing it with f&f rinse will kill it
and is therefore a waste of Product.

[Paul Simpson]

Just bought some more yesterday and probably wouldn't have read the label so thanks.

[markpowell]

Its what i was told to do with Clensan by a Prochem Trainer and its always worked well so until it doesnt i will just plod on
Mark

[Neil Williams]

Ok so what's going on?
Has CG been changed in some way so that it's not compatibale with CS?
Has CS been changed so it's not compatible with CG?
Were these products never meant to be combined but it's only just been noticed?
Or
Have been sold a product over the years not fit for purpose?

I can understand techniques change.
I can understand new products with new methods come into the market place.
But
I can't understand a product have so many changes on how it should or should not be used?

[Steve. Taylor]

I was told the product replacement is now neutra soft, this is what we are supplied with by bupa in the care homes

[expro]

B125
CLENSAN®
 CONCENTRATE
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE
COMPANY/UNDERTAKING
1.1. Product identifier: CLENSAN
®
 CONCENTRATE  Product Code: B125
1.2. Relevant identified uses of the substance or mixture and uses advised
against:
A concentrated bactericidal sanitiser and deodoriser, specially formulated for use on
carpets and fabrics. Clensan’s new biocidal formula is approved to EN1276 for direct
spray treatment and is effective against a wide range of harmful organisms including
bacteria and viruses.
Always pretest carpet or fabric for colour fastness and texture change before
proceeding.
Cleaning and sanitising: Soiled carpets and fabrics should be extraction cleaned
before application of Clensan. For best results carpets should be clean using S777
Crystal green or B109 Fibre & Fabric Rinse. Fabrics should be cleaned and then
rinsed using B109 Fibre & Fabric Rinse. Clensan solutions should always be freshly
prepared. Do not mix Clensan with other detergents.
Direct spray treatment: Dilute 30ml Clensan per litre of water (1 to 33) and apply by
spray applicator directly onto affected areas. Allow 5 minutes contact time, then
extraction rinse with B109 Fibre & Fabric Rinse solution. For gross contamination,
dilute 60ml Clensan per litre of water (1 to 15) and allow 15 minutes contact time
before rinsing. Heavily soiled carpets and fabrics should be extraction cleaned before
treatment. Clensan should be extraction rinsed after direct spray treatment.
1.3. Details of the supplier of the safety data sheet:
Prochem Europe Ltd., Oakcroft Road, Chessington, Surrey KT9 1RH, UK. Telephone
No (office hours 8am to 5pm, Monday to Friday only): 020 8974 1515 (UK) +44 20
897