[chopsie]

just ordered mine, that vent looks better than was shown on ebay. keep pics coming tomorrow please Roy, give me ideas how to fit 

[Roy Harding]

This were i got the reducer from.

http://www.axminster.co.uk/axminster-steel-reducers-prod21911/?searchfor=410083

And vent from ebay item no 220709344374

Roy

[chopsie]

Dam, thought they had come with the heater.

[chopsie]

Just paid £232.64 direct off his site. I am sure its cheaper on ebay, £185.06 for heater and wasn't £17.99 for flue? that should be £203.05 in my books!!! just been done for 30 quid 

[chopsie]

Think peter has added vat on price and then checkout adds it on again, I always get robbed 

[Peter Fogwill]

chopsi don't worry I will refund it tomorrow.  The vat has been added on and PayPal takes it off again.  It was brought to my attention a few days ago but I have not fixed it yet.

Peter

[Peter Fogwill]

Just refunded it now, it was easier than I thought.

Peter

[chopsie]

phew, Thanks for that Peter, I have been searching for your number as you have said you do not see a lot of emails. I will order that vent now with the refund  

[Nathanael Jones]

This were i got the reducer from.

http://www.axminster.co.uk/axminster-steel-reducers-prod21911/?searchfor=410083

And vent from ebay item no 220709344374

Roy

I melted 3 of those plastic mushroom caps before I ordered a metal one from america,....

[chopsie]

Its funny you should say that nathanael, the HSE bloke on the gas topic I posted asked if it were a plastic or metal vent 

[chopsie]

I melted 3 of those plastic mushroom caps before I ordered a metal one from america,....

got a link mate, cannot find any over here

[jasonl]

Can anyone tell me the max temp/flow rates /psi that will go through this heater , I am wanting 95c water at 100 psi about 5-10l/min , how close will this system come to this . I can not find any proper spces on the site ( or any other heater suppliers site).

[Nameless Drudge]

Can anyone tell me the max temp/flow rates /psi that will go through this heater , I am wanting 95c water at 100 psi about 5-10l/min , how close will this system come to this . I can not find any proper spces on the site ( or any other heater suppliers site).

You will get no joy from window cleaning hot systems if your after these specs,look elsewhere and be prepared to pay big bucks

[prestige cleaners]

im going to be very smug if this saves me £2k!

funny thing is ive been working in the snow the last 2 days and kept the tap over my shoulder and ive been fine. still be worth it though. that reminds me, need to take it off my expenses!

[[GQC] Tim]

Nice going Roy. Keeping an eye on this topic.

And the name Fogwash is just brilliant. 

[prestige cleaners]

yeah you need to copyright that foggy! "The Hot Fog Wash"

[Nathanael Jones]

I melted 3 of those plastic mushroom caps before I ordered a metal one from america,....

got a link mate, cannot find any over here

The shipping cost is criminal,. but I couldn't find anything similar over here. There is an internal flap that is supposed to be blown open by fan vented heaters, I removed this in my one as the L5 didn't put out enough fumes to lift it. You need some heavy duty pro sealant for fitting these, bathroom silicone will not last!

http://cgi.ebay.co.uk/Broan-Black-Roof-Vent-Cap-636-/370461163706?pt=LH_DefaultDomain_0&hash=item564134c0ba

[boldy1304]

is this fogwash completly ready to fit ie you get the regulator etc just connect pipes and gas bottle or do you have to go buy bits i have asked the question over e bay but NO REPLY

[Roy Harding]

is this fogwash completly ready to fit ie you get the regulator etc just connect pipes and gas bottle or do you have to go buy bits i have asked the question over e bay but NO REPLY

No you only get the heater you have to buy flue and regulator vent etc.

[prestige cleaners]

got mine today, thanks foggy! (4 day delivery, not bad in this weather from scotland!)

cant wait to rig it up. hopefully tomorrow.