This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Visual Architect

  • Posts: 23
Purefreedom System
« on: December 12, 2010, 02:08:57 pm »
need a bit of advice.

Purefreedom system,system working fine water running out of hose that connects to hose reel,when hozelock connector applied or tap turned off from tank to filter/pump," expecting a DE warning to say system has dead end"

No DE warning and water now not  running from hose to hose reel when connected

any suggestions

cheers

VA  ???


Slash

  • Posts: 1875
Re: Purefreedom System
« Reply #1 on: December 12, 2010, 02:25:55 pm »
Are you sure the hose connetors are on properly,when the tap is turned off it wont allow water through!

Visual Architect

  • Posts: 23
Re: Purefreedom System
« Reply #2 on: December 12, 2010, 02:35:41 pm »
Hose connectors on correctly,when the tap is in the on or off position i still am not getting a DE warning

i can hear the pump running all the time,it is when i apply the hose connector even before i connect to the hose reel i should get a DE warning

 the flowmaster stays at the pressure selected 35.

i know you ask why do you want to see a DE, its because the system is not working correctly and a DE warning should be shown

 

dai

  • Posts: 3503
Re: Purefreedom System
« Reply #3 on: December 12, 2010, 04:34:47 pm »
You haven't fitted a new connector by any chance? I did once and fitted one with a stop. I soon sorted the problem by cuttiing the stop out with wire cutters.