[Ian101]

Finally got my IBC set up in the garage and swapped all the filters etc from van.

600 litres used to take 10 hours to make so 1000 litres going to take nearly a day  . ... as well as using resin faster due to 4040 not operating at max capacity

Tap pressure now measured at 42psi so now need booster pump.

Can anyone suggest a good booster pump ?

[CRYSTAL1984]

crystalpuresystems.com

[Gav Camm lammy 283]

Finally got my IBC set up in the garage and swapped all the filters etc from van.

600 litres used to take 10 hours to make so 1000 litres going to take nearly a day  . ... as well as using resin faster due to 4040 not operating at max capacity

Tap pressure now measured at 42psi so now need booster pump.

Can anyone suggest a good booster pump ?

any water for me yet m8

[Ian101]

lol not at the rate is being made today ... had to turn it off and bring hosepipe in as not want it to freeze so only a mere 3 inches at bottom of ibc so far.

Plumber let me down over weekend who was supposed to be fitting tap inside garage.

[mikecam]

Finally got my IBC set up in the garage and swapped all the filters etc from van.

600 litres used to take 10 hours to make so 1000 litres going to take nearly a day  . ... as well as using resin faster due to 4040 not operating at max capacity

Tap pressure now measured at 42psi so now need booster pump.

Can anyone suggest a good booster pump ?

Ian this is the one i have........
put the following into ebay search box.........#180587954359

Mine came with a pressure tank and adjuster, i'd have a word with them see if they can still get them. My gauges show 80PSI across both pre filters and i produce water at about  4/5ppm. I aint getting anymore DI resin wwhen my bag runs out !!!! And its fills quick !!!!
 That pump may well work just as well without a pressure tank as i believe the tank is just to keep the pressure constant. But i think the RO membranes pretty much do that anyway as there is only so much you can shove through them and most if not all 4040 RO's are capable of what that pump pushes. As far as i know you do need a good water flow as that pump will consume (forget what it says it can pump) about 6 litres a minute when pushed at pressure through an RO so your supply will need to be able to keep up. If not you'll need a header tank.

[dave0123]

my PSI is only around 18 21 really crap..

i use this booster pump its great recomended from people on here and also June at gaps water

http://www.machinemart.co.uk/shop/product/details/cbm240e-1in-multi-stage-230v-booster-pum

[Ian101]

Thanks Mike / Dave / Crystal .... Mike will try them tomorrow looks the part though !

[Gav Camm lammy 283]

you must av plenty ov dollar ian lad 

[Ian101]

not at the moment but when it all comes together will be happy enough