[Richy L]

I need to clean some slippery decking, which is fine, but does anyone know how to increase the grip on it to stop it being slippery again?
It is for a public building so it has to be safe.

[jaespray]

hi richy  try "step on safety"  one of many
appart from that there is only one place for decking
regards john

[Nameless Drudge]

hi richy  try "step on safety"  one of many
appart from that there is only one place for decking
regards john

I can`t tell what you mean here and would like to

[Nameless Drudge]

Got it,  Step on Safety, a revolutionary anti-slip material for existing decking.

[davep]

What kind of pressure is best fr cleaning slippery decking?

[Richy L]

I use 3,500 psi, 15 lpm. Cleans it well. If you use something to small you will end up with lines everywhere

[davep]

That's what my machine goes at max, thought would be too much fir decking?

[jaespray]

hi dave   i use 300mm rotary with fan jets  go with the grain    not across the grain   dont leave it in one place for more than a fraction of a second   and move at a constant speed    as far as pressure goes depends on the quality of the wood  and pressure control of your machine   my machine is rated at 200 bar 30 ltr a minute   best of luck
 regards john

[Roger Oakley]

appart from that there is only one place for decking

Still don't understand what you mean?

[Richy L]

hi dave   i use 300mm rotary with fan jets  go with the grain    not across the grain   dont leave it in one place for more than a fraction of a second   and move at a constant speed    as far as pressure goes depends on the quality of the wood  and pressure control of your machine   my machine is rated at 200 bar 30 ltr a minute   best of luck
 regards john

30 ltr a minute?! thats a lot

[jaespray]

appart from that there is only one place for decking

Still don't understand what you mean?

the only place for decking is on a
                                                                                ship