[jarvy]

Hi,i have a 200gpd r/o with a 125psi booster pump on it. The open flow of the pump say's it is 1.2ltr a min open flow. Is this enough,or do i need more of an open flow to the r/o to be more effective ie quicker!
This setup has done for me up until now,but would like to make pure a little quicker,taking me about 10 hours just to make 250 ltr of pure.
Membranes are coming up for a year old now,so may be an excuse to get a 4040...

[bobplum]

were in terms of location is the pump situated
it should  sit in between the fillters and the membranes
bob

[jarvy]

Before prefilters,was under the impression that it doesn't matter were the pump was located.

[bobplum]

i spoke to purefreedom when buying mine,the advice was after the pre filters and before membranes
try changing the postion and change filters
bob

[easycleaner]

Bobplum is right got mine from pure freedom and it needs fitting after the pre filters but before the ro's.
Speak to pure freedom they will help you i'm sure.
Mart

[jarvy]

I will give that a try then,see if it makes a difference...