[dazmond]

nearly 6 weeks in and im wfpoling top and bottoms on nearly all properties now!windows are coming up much better than first cleans!

im using between 300L-350L a day at the moment with flow on 60(pure freedom digital controller).

ive noticed some spotting on some windows from my first cleans but custys happy second time round as they ve come up virtually spotless!

will they get even easier on third/fourth/fifth cleans?


regards

dazmond

[Blue Frog Systems]

3rd time you'll be laughing your socks off matey... plain sailing from there

[DaveG]

Good on you Daz...onwards and upwards!!

[Bobs Window Cleaning]

60 

Mine is on 31 and it still delivers more than enough water.If I was to turn it up to 60, there would be water splashing everywhere.

 Does this mean all flowmasters have flow rates regardless of the numbers on screen.??

Bob

[Sapphire Window Cleaning]

I have my purefreedom flow controller on 60 nearly all of the time.
I find this the most efficient setting for the pace I work at.



Matt

[Bobs Window Cleaning]

All I can say is you guys are wasting a heck of alot of water or my flowmaster is wrong.
I can remember pure freedom telling me the norm was around 30-40 

[SB Cleaning]

All I can say is you guys are wasting a heck of alot of water or my flowmaster is wrong.
I can remember pure freedom telling me the norm was around 30-40 

I run mine on 30 to bob cleans them just fine

[Your Choice w/c]

My Pure Freedom controllers are set at 35 and dont have any problems.For new cleans i might increase the flow rate but 60 seems high to me too.

[mci services]

the lads that use them on 60 probably work quicker and spend less time on each window I did away with mine altogether

[mac74]

hi daz, u replied to my message the other day (the guy with the broken ankle) i was wonderin if i could talk 2 u over the phone about reach and wash systems as im at the point u where 6 weeks ago - been doing loads of research and my heads spinning! I STILL DONT know where 2 start? help me out mate

[Bobs Window Cleaning]

the lads that use them on 60 probably work quicker and spend less time on each window I did away with mine altogether

I think most of us spend similar times on windows.

I just think that if the flow is set to 60 then way too much water is being used and wasted. Maybe some of you guys should turn it down and let us know how you get on.

Bob

[MNWC]

Forget your readings lads

you need to measure the amount of water coming out of your brush per minute.

should be between  1.5 - 2.0 litres per minute.

[jouk45]

nearly 6 weeks in and im wfpoling top and bottoms on nearly all properties now!windows are coming up much better than first cleans!

im using between 300L-350L a day at the moment with flow on 60(pure freedom digital controller).

ive noticed some spotting on some windows from my first cleans but custys happy second time round as they ve come up virtually spotless!

will they get even easier on third/fourth/fifth cleans?


regards

dazmond

well done daz. i have been following your regular posts, i dont think i have ever seen anyone in all the years i have been here, do regular  posts,  of all their everyday activities, keep them coming, if we can help you in the way, am sure all the members will help  you on the  way  keep the good  work up

[mci services]

the lads that use them on 60 probably work quicker and spend less time on each window I did away with mine altogether

I think most of us spend similar times on windows.

I just think that if the flow is set to 60 then way too much water is being used and wasted. Maybe some of you guys should turn it down and let us know how you get on.

Bob

Thanks Bob I spent two years trying to use less water then had to work without a controller for a week. I will stick to what works best now for me and helps me work quicker.

oh and well done daz by the end of the second cleans you will fly through

[Window Washers]

All I can say is you guys are wasting a heck of alot of water or my flowmaster is wrong.
I can remember pure freedom telling me the norm was around 30-40 

so 99 is ott then   

[Sapphire Window Cleaning]

lol @ window washers
Andrew Thompson told me to use it on 22 when I first bought my system.
I found this very slow and time consuming, I think it was Ian (Window Washers) who told me to crank it up, this in turn will speed up the cleans (same amount of water used just less time)




Matt 

[mci services]

Couldn't agree more matt and window washers. Bob instead of us turning down the flow why not turn yours up and see what happens

[JSMC]

ok how long you spend ona average size window clenaing guys?

[dazmond]

i like mine on a high flow esp when rinsing brush off which im doing on all windows at the moment.

ive tryed to rinse with brush on and i just left spots or brush marks so im sticking to brush off with a high flow.

im not bothered about the amount of water i use as i can always purify water on demand with my small DI and a couple of barrels!

good results im interested in both for me and the custy!and thankfully wfp does seem to be doing a good job on most windows second time round!

ive also still got a bit of  that newbie fear that if i try and skimp on water ill do a crap job!!! :

[tws]

daz i know you wont do this but it would be interesting if your custies were given envelopes and a pole slip inside rating your wfp against your traditional cleaning, you know to see what they really think without having to say it to your face, i still doubt that wfp can do a better job than traditional cleaning and i think your custies would tell you as much given this kind of vote, i think im right in saying you cleaned frames as well before going wfp. that said im am pleased its going well for you.