This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

geefree

  • Posts: 6180
Friend has a brand new one, 6 stage 300 gpd, and he has the same pressure and tap tds as me, ... and my ro produces pure water  at 00.0 or 00.2

My friends is at 0.19 after ro..

All new! so should he be producing the same tds? 

Perhaps they are inferior filters,

What do you think lads?

SB Cleaning

  • Posts: 4287
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #1 on: July 07, 2010, 10:52:04 pm »
Mine is a fairly new system reads 000

Where did he buy it from???

Sapphire Window Cleaning

  • Posts: 2942
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #2 on: July 07, 2010, 11:00:57 pm »
Are you talking about just the RO or RO and DI?
after my RO it reads 016, after the DI it reads 000


Matt
Reaching parts traditional window cleaners can not reach.

d s windowcleaning

  • Posts: 2782
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #3 on: July 07, 2010, 11:21:22 pm »
if its brand new gazza it will take a bit of time for tds to fall .
where theres muck theres money

SB Cleaning

  • Posts: 4287
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #4 on: July 07, 2010, 11:24:21 pm »
if its brand new gazza it will take a bit of time for tds to fall .
Whys that mate??

Mine was brand new and its always been 000.

geefree

  • Posts: 6180
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #5 on: July 07, 2010, 11:25:00 pm »
Thanks,

its from collins water products.

No di, just ro... mine is 3 0r 4 years old with the same membranes, and i replace filters regular, ... i just thought with his being new.......

Sapphire Window Cleaning

  • Posts: 2942
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #6 on: July 07, 2010, 11:25:37 pm »
Mine is a fairly new system reads 000

Where did he buy it from???


is this after the DI?
As I have never heard of an RO on its own reading 000.

Matt
Reaching parts traditional window cleaners can not reach.

geefree

  • Posts: 6180
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #7 on: July 07, 2010, 11:25:41 pm »
Its been well flushed as the instructions say.

geefree

  • Posts: 6180
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #8 on: July 07, 2010, 11:27:53 pm »
Well i have never used resin, i have a 10" resin thing, which came with the ro, but its not attached and i would not know where to put it anyway

the ro-man has always produced 00.00 without resin.

Sapphire Window Cleaning

  • Posts: 2942
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #9 on: July 07, 2010, 11:34:05 pm »
Well i have never used resin, i have a 10" resin thing, which came with the ro, but its not attached and i would not know where to put it anyway

the ro-man has always produced 00.00 without resin.


What is your tap TDS?


Matt
Reaching parts traditional window cleaners can not reach.

geefree

  • Posts: 6180
Re: What Does your Ro unit produce in TDS ?
« Reply #10 on: July 07, 2010, 11:37:24 pm »
Its normally around 100m -120 ish , that will produce 0.00, but lately the whole area is up at 250 tds,

but mine still comes down to 0.02, and his is 19

Sapphire Window Cleaning

  • Posts: 2942
Re: What Does your Ro unit produce in TDS ?
« Reply #11 on: July 07, 2010, 11:40:17 pm »
My tap TDS reads 300, I have a ROman 500 GPD RO with an aquatec booster pump, after the RO my water reads 016, then it passes through my 6.9 litre DI vessel where it is 'polished' at this stage it reads 000


Matt
Reaching parts traditional window cleaners can not reach.

mikecam

Re: Does your Ro unit produce Pure Water at 0.00
« Reply #12 on: July 08, 2010, 12:53:31 am »


is this after the DI?
As I have never heard of an RO on its own reading 000.




I can confirm with my own eyes, that my fried has an incoming TDS of 60ppm into his twin RO (facelift system) and a water pressure of 100+ PSI he has 0ppm going into his vehicle tank and thats before his DI bottles (which he has never had to renew with resin)!!
 My own is a pumped 80 PSI and a tds of 130 and it fills my vehicle tank with water at a tds of 9ppm, through as HF5 membrane.

geefree

  • Posts: 6180
Re: What Does your Ro unit produce in TDS ?
« Reply #13 on: July 08, 2010, 01:04:32 am »
Well i have never used resin, i have a 10" resin thing, which came with the ro, but its not attached and i would not know where to put it anyway

the ro-man has always produced 00.00 without resin.

Nathanael Jones

  • Posts: 5596
Re: ..This helps us all.What Does your Ro unit produce in TDS ?
« Reply #14 on: July 08, 2010, 06:32:58 am »
Friend has a brand new one, 6 stage 300 gpd, and he has the same pressure and tap tds as me, ... and my ro produces pure water  at 00.0 or 00.2

My friends is at 0.19 after ro..

All new! so should he be producing the same tds? 

Perhaps they are inferior filters,

What do you think lads?

Did you use the same TDS meter to test both?

glen parva

Re: ..This helps us all.What Does your Ro unit produce in TDS ?
« Reply #15 on: July 08, 2010, 07:03:26 am »
ive got one from collins water supplys
my water is 247 ro down to 002
 ;)

AuRavelling79

  • Posts: 25394
Re: ..This helps us all.What Does your Ro unit produce in TDS ?
« Reply #16 on: July 08, 2010, 07:30:23 am »
My roman type 300gpd, which I've had for 5 years and several membrane changes - depending on the ingoing TDS which is about 350 - is usually between 008 and 014 and after about 9 months it creeps up and I replace the membranes at about 022 after a year or so.

Pressure is about 75/80 psi.

I use about 1250L a week of pure (so 2500 goes to waste).
It's a game of three halves!

d s windowcleaning

  • Posts: 2782
Re: Does your Ro unit produce Pure Water at 0.00
« Reply #17 on: July 08, 2010, 09:02:10 am »
if its brand new gazza it will take a bit of time for tds to fall .
Whys that mate??

Mine was brand new and its always been 000.

from the information given to me by ro-man when i bought mine theres a chemical on the membrane which can take a while to wash away , this will result in tds being slow to drop when i first bought mine tds was around 12 for a couple of days before it went down to 4 which it never went below , not all ro units will bring water down to 000 , i just set my mates unit up for him last week and his tds as been slow to fall .
where theres muck theres money

chopsie

  • Posts: 1736
Re: ..This helps us all.What Does your Ro unit produce in TDS ?
« Reply #18 on: July 08, 2010, 09:36:11 am »
I got a 300gpd from pure freedom. tested this morning, 248 going in 005 coming out. Put it through resin went up to 012ppm, obvoiusly resin is shot. will not bother changing it though as i understand 005 is fine to work with. I have a aquatech booster pump on my system aswell.
chopsie

D B Services

  • Posts: 97
Re: ..This helps us all.What Does your Ro unit produce in TDS ?
« Reply #19 on: July 08, 2010, 11:07:53 am »
RO-MAN use quality American made membranes while the others use inferior chinese made ones hence the difference in TDS out.

I am no fan of RO-MAN but their membranes are good.

Dan