[www.mrgutters.co.uk]

hi guys some pics of my system its 100% ready and functioning now ... thank goodness.


shawn


if anyone has pics of theres lets have a look .   

[Sir Squeaky]

Blimey, couldn't fit that out the back of my house!

[www.mrgutters.co.uk]

some pics of the van . 

oh if anyone wants signage the bloke that did mine charged me £37.00 for the lot and 3.50 pp i had to put it on though easy enuf. let me know if you want his details.

[Moderator David@stives]

is that a diy jobby
good on you
good luck and watch them spots 

[Sir Squeaky]

good luck and watch them spots 

[www.mrgutters.co.uk]

well i bought the system that being ro 300gpd / 36ft powerpole / clarke submersible / 640ltr ibc / hose reel 5mtr / tds meter / for £800 about 3 months back , then added bits and pieces as ive gone along just installed my 100psi shurflo and di vessel today .
 it dont look that good but it works well.. cost me all in all £1100.


shawn

[Moderator David@stives]

cheap enough .at least you know how it all works .what is your tds .

[Davindo Cleana]

Nice job Shawn - I am just about to get the van signed and got quoted 80 quid and upwards - is your signer somebody you dealt with on the net - can you give me a contact
also i have same van - did you put the mortice locks on the door posts

[Moderator David@stives]

even better do this

[Davindo Cleana]

Unchain my car

[easycleanwindows]

heres mine

[easycleanwindows]

.

[www.mrgutters.co.uk]

nice setup mate ... looks good ....


the bloke i got sign from is on ebay

martin graphttp://cgi.ebay.co.uk/VAN-CAR-ADVERTISING-SIGNS-GRAPHICS-also-MAGNETIC_W0QQitemZ7995652583QQcategoryZ72212QQrdZ1QQcmdZViewItemhics

my tds is 457 before ro then 000 then put it in van then polish it one last time with di

shawn

[24-7 S C Services]

Hi everyone

Nice set up shawn, how is your tank fixed to your van?

Also easyclean, where is your waste outlet going on ur merlin unit? and where did you get the hose reels from??? are they any good?

Thanks

Andrew

[www.mrgutters.co.uk]

bolted through 2 sheets of plywood about 20mm thick then through the floor , and bolted up tight

shawn

[Moderator David@stives]

easyclean

i noticed your tranny do you have any rust problems on the outside as your paintwork looks good and it would be terrible to get a few rust spots which i personally associate with trannys well at least the ones ive looked at .
and do you have any reliability problems

chears dave

[24-7 S C Services]

HI Again Shawn

Do yourself a favour mate, save some pennys up and get the tank fitted properly. I would not like to hear you have had an accident and the tank has shot off. Don't forget mate, the weight of the tank increases the faster you go in the van. Keep the speed down.

Andrew

[Moderator David@stives]

shawn

that is excellent advice from 24-7 .

i never spotted it myself .there is some eagle eyes on here.

hope everyone takes note of his advice.

[www.mrgutters.co.uk]

where can i get that done mate, oh and cheers for your help today.

shawn

[24-7 S C Services]

Hi Again Shawn,

No problem about the help, anytime.

You should see if you have a local metal fabricator (iron monger/ welder). Ask them how much to have a support frame made. You will probably need it to go around the tank (because I don’t know if the cage on the tank will handle an impact?), or at least through the bottom of the caging.

It will need bolted down in all four corners. Under the chassis, they should fit large square sheets of metal for the bolts to go through.

I am rubbish at explaining and if I could do metal work I would make them, lol.

I will draw you some pics tonight and email them tomorrow for you. The main thing is, for them to have a minimum of a ten ton breaking capacity.

The easiest way, would be to ask Ionics if they would sell you their straps for the tanks, but I have a feeling they would say NO.

Andrew