[mikeyfaerosyth]

peter,if i order tonight when do you think brush would arrive.im over in dunfermline.

[Peter Fogwill]

Mikey you are only 15 minutes away, you could come tommorow and pick it up if you want?  Other than that I could send it out tommorow first class, but it will be at the mercy of the PO.

Peter

[mikeyfaerosyth]

what time are you open till peter

[Peter Fogwill]

Normally until 5

Peter

[mikeyfaerosyth]

ok will make it over before 5

[mci services]

dunfermline to broxburn in 15 minutes thats shifting

[jouk45]

peter i put a pic up, its on the 1st page,

[Peter Fogwill]

peter i put a pic up, its on the 1st page,

That is an old one Jouk.  The new ones are the same except for the toggle itself, the new ones are metal.  You can still use the same connectors.

Peter

[Smudger]

Chopsie -  yes its fine to leave brush on glass - i have superlite with fans.

Peter - do you sell the autobrush bits on their own ?  would like to fit to superlites ?  have you a price ??


cheers

Darran

[jouk45]

peter i put a pic up, its on the 1st page,

That is an old one Jouk.  The new ones are the same except for the toggle itself, the new ones are metal.  You can still use the same connectors.

Peter

so do i just buy the whole top section, the threaded part and new toggle, thanks pete

[chopsie]

Chopsie -  yes its fine to leave brush on glass - i have superlite with fans.

Peter - do you sell the autobrush bits on their own ?  would like to fit to superlites ?  have you a price ??


cheers

Darran

cheers smudger. tried it tonight on my windows with superlite dual trim flocked, mixed results, most are good, but one in particular is covered in white spots. do you use a mono superlite?

[Smudger]

yes i have mono's - thats what Peter will reccomend - i think the flocked hold to much dirt.

for a cheap experiment nip down to asda and pick up a broom head for a couple of quid ( these are/were bentley brushes ) which are monofilament - put in the fan jets and try that - i use one for conny roofs and soffit facia jobs which the bristle length trimmed down about 1/2 inch it really shifts the muck off.

Darran

[chopsie]

i might try that when i get back off hols (going to cyprus on sat). could do with something with more scrubbing power on con roofs

[NJWindowCleaning]

Unable to comment on the autobrush as i have never used one or brought one in that case.... but have seen the video of one in use looks ok.. i keep to the tap system on my side.

[jouk45]

Unable to comment on the autobrush as i have never used one or brought one in that case.... but have seen the video of one in use looks ok.. i keep to the tap system on my side.

thats caveman compared to the autobrush  you should get one, honest best think i ever did years ago

[Peter Fogwill]

peter i put a pic up, its on the 1st page,

That is an old one Jouk.  The new ones are the same except for the toggle itself, the new ones are metal.  You can still use the same connectors.

Peter

so do i just buy the whole top section, the threaded part and new toggle, thanks pete

No Jouk, you need the whole thing.  It comes as a complete unit.

Peter

[jouk45]

oooooooo no 

[jouk45]

peter, it is a pity you do not have a page on your website, exclusively about the auto brush, with pics and videos, also showing spare parts, also if it comes complete with brush, or if we can send our own brush into to have the switch fitted, ect. also some folk have a weight issue with the switch, i dont, but what if you took both metal tube connectors off and replaced with these plastic ones, that would knock i bit more weight down,

[Peter Fogwill]

I did have them on EBay Jouk but there was not a big demand so never re-listed them. 

I should have a site up shortly where all the spare parts I do are listed separately and available to buy.

I have replaced the old metal connectors ages ago, for a good quality Legris nylon fitting, they are smaller and much lighter. Like I said in the first post the attachments weigh only 44g

Peter

[Nathanael Jones]

Jouk,.. how did your lego autobrush work out?