[Washers]

Unger Swivel Loc Squeegee. Just got one of these but it does not come with the normal Unger quick release fitting how do you clamp the rubber in the channel. I am using a brass end clip at present is the the correct method. Cheers all.

[ftp]

Doesn't it have the s channel? The sprung loaded clip should have two prongs that bite into the rubber blade and hold everything in place.

[Washers]

FTP, yes it has the S channel but it does not have the sprung loaded  type body it only clamps the channel by tightening two nuts with a small spanner but there is nothing to grip the rubber hence I am using a brass end clip to do the job.

[michael papworth]

Same here. Using brass end clips.

This is the 0 deg, isn't it? The 30 deg has the regular S channel grips.

[wizard]

It works like a s channel but is not quik release the screws push the small teeth into channel.I would doy easr this squegee it works better.

[wizard]

I ment dog ear sorry my typo are up the ..., tonight.

[Washers]

Cheers guys, just watched Mark the window cleaner on U tube with this tool and his has the quick release meachanism is it different in the US/Canada market to the UK then?

[wizard]

I think Marks one is the 30 degree lock model as that one has a quick release my flat angle is not.

[jonnyald]

Cheers guys, just watched Mark the window cleaner on U tube with this tool and his has the quick release meachanism is it different in the US/Canada market to the UK then?

think your right,the american one is different ,better .     i too have one like yours and i never use it   because cant  change channels quickly

[Ian W]

I have sprung loaded 0 and 30 degree swivelocs. I think older versions had the fixed clip.

If you have an old unger squeegee with the spring clip, it will fit the swiveloc.

[dazmond]

i have the unger swivel lock 30degree squeegy.i use it as my main squeegy and can just pop it on my pole when needed and swivel .its quick release with 2 claws that grab the rubber.never used brass end clips ever in 15 yrs.