[paul beckett]

sorry to bring up this subject again but i need to know the step by step instructions a harris pole converted into a wfp, so i can use it for the guttering and fascias, and also the components list.
i need to make one pretty quick, my other wfp is totally broke, ive got a few jobs to be done. while i work out what is wrong with my wfp.
please can somebody help and lead me in the right direction.

thanks very much and hope to hear fom somebody very soon.

kind regards
paul

[jeff1]

google it into UTube, I think Ian made a video of it once

[mci services]

i bought one off the shelf and screwed my brush straight on to the black plastic bit and it cut its own thread. the brush was angled so i get away with it. job done

apart from that all you would need to do is add a plastic angle thing and if you really want to drill a hole and run the hose through the pole. but i never bothered i just have the hose on the outside

[tomy jackson]

drill the two rivet out and remove top bit shuv the plagy brush end in and use srwue to hold in place dill hole near top of ally 1 1/2" then drill big hole in base

[gary999]

if in hurry cut down plastic screw on end ,heat up then
screw into plastic gooseneck it will cut its own thread
then under cold tap few wraps of tape

[mci services]

if in hurry cut down plastic screw on end ,heat up then
screw into plastic gooseneck it will cut its own thread
then under cold tap few wraps of tape

i found you didnt even need to heat the end up just a bit brutal force and it cut its own thread

[R W C]

http://www.youtube.com/watch?v=_Q8HhgHcz0M&feature=channel_page

[L.J.Thorpe]

if you are in a real hurry buy a cheap carwashing brush,jet it with  micro watering connectors and screw it straight on to the alu screw under the plastic end cone on the harris with a bit of araldite
made one for my lad to use works fine 25 quid all in

[paul beckett]

thanks alot people you lot are a gem.
kind regards
paul