Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Paul Redden Countryfresh

  • Posts: 773
drymaster tool problem
« on: June 11, 2009, 06:40:10 pm »
I have a Drimaster Mk 1 hand tool. The chrome section ie the jet assembly has come out with a small brass pipe and nut on the end. Does anyone know how to get this back?  I can unscrew the hose but how do I access the Inside of the hand tool?

Cheers Paul
Logged
"So basically its a big vax!"

Glynn

  • Posts: 1129
Re: drymaster tool problem
« Reply #1 on: June 11, 2009, 06:57:05 pm »
Take the window out and take the underside numpty /valve out. It will then all come out through the window aperture.
Logged
Regards
Glynn

Paul Redden Countryfresh

  • Posts: 773
Re: drymaster tool problem
« Reply #2 on: June 23, 2009, 08:02:14 pm »
Thanks Glyn, I have finally got round to dismantling it. I have removed the perspex
cover and the metal plate underneath. I have removed the securing nut holding the valve/shut off lever and small collar nut. But I find the spindle of the valve is too long to go through the hole in the body.

Any idea's

Cheers Paul
Logged
"So basically its a big vax!"

Glynn

  • Posts: 1129
Re: drymaster tool problem
« Reply #3 on: June 23, 2009, 08:11:28 pm »
Turn valve upside down (  think from memory ) it WILL come out though.
Actually, undo the small nut which the valve spindle comes through and then the spindle will come out, making it all smaller.
Logged
Regards
Glynn
Pages: [1]