Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Central

  • Posts: 51
Anyone got any tips on using GG3
« on: September 30, 2003, 09:45:51 pm »
I bought GG3 a couple of months ago and haven't been too impressed as Ive mentioned in an earlier post.  We're in a soft water area and it should be great from what they say but it's no better than fairy.  Ive tried varying amounts and Ive stuck at it for a while so I can get used to it.

Anyone no of any helpful advice for using GG3, how much do you use, how do you apply and squeegee it, do you get smears if you leave it at the edges without wiping off fully (cause it says you won't but Ive tested it and it does).  Anything will help

Cheers

sham33

Re: Anyone got any tips on using GG3
« Reply #1 on: October 01, 2003, 12:01:49 pm »
If its like GG4 dont exceed the dosage. Make sure u change the rubber in the sqeegy every few days and try to leave a 1/4 inch gap at the top of the window and use the sqeegy to push the water over the gap at the top.

I didn't like the stuff at first but i wouldn't be without it now. I had to slow down my sqeegy action at first to get use to it, it was like starting over again but im faster than ever now.

Jake

  • Posts: 348
Re: Anyone got any tips on using GG3
« Reply #2 on: October 05, 2003, 11:39:26 pm »
Just received free sample of GG3 from The WindowClean Centre (thanks Anne !) and used it yesterday on an office block whose windows are always covered in crap, insects, cobwebs etc,  it was the mutts nuts! brilliant. I have always spent ages detailing, I thought that was the way it was (self taught), not any more! ok, maybe just a quick wipe round with the scrim, and wipe the cill but cut my time in half!  The fairy liquid's in the bin!!!

Thanks for the info guys!    
Exeter, Devon

simonb

Re: Anyone got any tips on using GG3
« Reply #3 on: October 06, 2003, 12:27:20 am »
jake wot's the www for the window clean centre?
simon

Central

  • Posts: 51

Majestic

Re: Anyone got any tips on using GG3
« Reply #5 on: October 06, 2003, 07:23:29 pm »
Wintecs have got a offer on GG4 £33.36  inc p&p and vat  8)

g_griffin

Re: Anyone got any tips on using GG3
« Reply #6 on: October 06, 2003, 10:48:55 pm »
hi majestic     gg4 is still cheaper at scrim city especially when you make a big order- over 100 pounds(i know its a lot) as no delivery charge. i believe the federation is even cheaper. 24.53 incl. vat at S.C.  delivery charge 5.95 plus vat

Jake

  • Posts: 348
Re: Anyone got any tips on using GG3
« Reply #7 on: October 06, 2003, 11:06:25 pm »
simonb

try ringing windowclean centre direct on 0800 413512 and ask for a catalogue and a free sample, remember GG4 for hard water areas only, GG 3 for soft, good luck!

                               jake
Exeter, Devon

karlosdaze

Re: Anyone got any tips on using GG3
« Reply #8 on: October 06, 2003, 11:31:45 pm »

Central

  • Posts: 51
Re: Anyone got any tips on using GG3
« Reply #9 on: October 07, 2003, 06:14:45 pm »
Cheers Ill check that website out

STEVE71163

Re: Anyone got any tips on using GG3
« Reply #10 on: October 07, 2003, 07:59:08 pm »
Hi Central,
               Both GG3 and GG4 take quite a bit of getting used to but its worth persevering as its the best liquid out their in my opinion. ;D

Steve Lowe

fez

  • Posts: 193
Re: Anyone got any tips on using GG3
« Reply #11 on: October 23, 2003, 01:16:49 am »
I've been using GG3 this week to try to get used to it. I get a good finish but I seem to use more scrims not less when detailing.

Should you remove the fine beading at the edge? When I do, it seems to spread and takes me ages to remove. Any ideas?  My windows are taking much longer than with Fairy. I change blades every other day and I live in a soft water area.

simonb

Re: Anyone got any tips on using GG3
« Reply #12 on: October 23, 2003, 01:26:41 am »
Don't go right to the edge with your applicator. The blade will clean right to the edge. I have just started with gg4 this week and I have stopped detailing altogether.
Simon

fez

  • Posts: 193
Re: Anyone got any tips on using GG3
« Reply #13 on: October 23, 2003, 01:35:20 am »
I've been trying to leave a gap, obviously not enough. How much should I leave at the edge? :-/