[paul_smith]

What is the best thing to keep quick connectors working
freely, is WD40 ok?
Paul

[*paul_moss]

Paul i clean mine out weekly making sure any gunge around the bearing are cleaned,dry them out with a clean cloth and then coat in a light  oil spray.
Iwould imagine wd 40 would be ok. The key is keeping them clean and free regulary.
paul

[williamx]

I use wd40 no problems so far

[Dynafoam]

Both WD40 and mineral oil will have an adverse effect on the rubber seals.

I use zinc & castor oil ointment but silicone grease sprays are available that are designed for this purpose.

[Kinver_Clean]

A good spray is available from most caravan dealers. It is Thetford seal lubricant and is for the seals in a loo.  Costs £2-£3. This is specifically for neoprene and rubber. WD40 will rot them sooner than later.

Trevor

[paul_smith]

Thanks chaps.

[carpetmas5]

I have always used silacon spray.

[lee_gundry]

vasaline


lee g

[Len Gribble]

I’m with Lee G on this, very versatile used to use when I stored one of my bikes over the winter.

Len