[sham33]

Hi, i used my wfp for the first time proper yesterday and i was impressed with it all  I got a pump box from cleantech and had the flow on high. The windows rinsed really well ( been using GG4 for over a year) but ofcourse the water dont last too long with high flow.

Would it be ok after a couple of cleans to not rinse the window? or is this an importaint part of wfp cleaning?

Maybe, im not sure, the windows rinse better with less water after a couple of cleans?

[williamx]

You will find that after 3-4 cleans you will be turning the flow rate down also as you get more experenced you will be able to clean quicker with less water used and I always finsh off with a rinse.

[easycleanwindows]

I use over head spray for cleaning all windows but you must rinse even after 100 cleans.Its the dirt on the windows that will leave spots so if you dont rinse after the dirt spots will stay on

[CE_Services]

Always rinse, always rinse, always rinse

[washglowboy]

Hi
If you turn the flow rate down to about 35psi ( you should have a dial on your pump box) you will not only save on water you will also get more life out of your pump.
But I generally always Rinse.

 "HOPE THIS IS HELPFUL"

Washglowboy   :

[sham33]

Thanks for replys  I did some diamond shaped leaded lights yesterday and no way would the water sheet down the window. Is that normal with those type of windows or could it be the glass 

I've done leads that are square shaped and these rinse ok.