[Clear Vision]

Hi all,

any electricians out there that could point me in the right direction with wiring up my varistream.

My old one broke so we had to connect the pressure switch on the pump and run it on full power what a waste of water.

I took a couple of pics for you to help me identify the wires.

[H h20]

Hi Matt,
if you look on williamsons website,there`s diagrames to show you how to do it,
Gaz
www.williamsonpumps.com

[Clear Vision]

Thanks gaz!

Is it really as simple as it looks?

By the look of the diagram a small child could do it and there was me getting in a right fluff

[Ladders]

Hi clear vision

The left hand feed black & red wires go to your battery,red to pos terminal thats the one with the fuse on it. The right hand pump black & red wires go to the pump black to black & red to red.

It says on the bottom of varistream which is feed & pump.

Hope this helps cheers Jeff.

dont forget to to disconnect pressure switch from pump first.

[Clear Vision]

Hi clear vision



dont forget to to disconnect pressure switch from pump first.

Thanks,

I still need to leave the pressure switch mounted to the pump but just disconnect the wire?

[Ladders]

Yes, you dont need the pressure switch connected with the varisteram.

Jeff.

[jeff1]

Yes, Matt just leave the switch on the pump and connect the wires from the pump to your varistream, any problems I'll take some pics for you to return the favour.

[Easyclean Windows]

THRY THIS leave the switch on the pump  and also once you have wired up tighten your glands under the varistream to stop any water /moisture getting in

[Clear Vision]

Thanks guys for your help.

I will give it a go after ive had my food. Hate working on an empty stomach