[vivaro 013]

im busy fitting my van out with my water fed pole systems , i don,t want to store my poles on the van roof of my vivaro  , anybody got any ideas on storage and brackets

[squeaky-clean 1]

do your pole fit into a vivaro we have a movano and they only just fit inside there.

we hook them on the wall with tool hooks like you use for ladder storage.

[vivaro 013]

the walls are used for storing  over equipment . the only over options is hanging them from the roof

[Moderator David@stives]

I use a rope across the back of the van about 18 inches from the roof, I slide the poles in butt end first with the brushes just resting over the rope.

Dave

[jeff evans]

Dave I've gone up market, i use bungees.

[Jeff Brimble]

You could use lightweight corrugated pvc sheet supported by 2 wooden cross pieces.

[vivaro 013]

problem is when storing poles you have water feed pipe sticking out of end of pole ,im trying to look solutions to solve this problem when storing ,plus looking at ideas on storing poles

[master cleaner]

this is the way i do it it is a citreon dispatch van i have changed it a bit since as i have now got a tank in there and a couple of hooks on the side of the van for the hose but it works great for me.




gary

[surecleansystems]

We use  4 inch sewer piping which you can get at any plumbers . The brackets screw onto the ribs on the roof in the van and in the vivaro you can fit two if necessary.
It is cost effective and works well for us.

If the link works you can see it set up in a  Vivaro.


http://www.surecleansystems.com/gallery.htm