Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

NWH

  • Posts: 16952
Lack of flow due to dodgy vessel
« on: March 29, 2019, 08:59:04 pm »
Has anyone had this at all,I’m getting poor flow intermittently even when the pump is flat out I’ve been told this could be due to the resin vessel.
Thanks
Logged

Smudger

  • Posts: 13437
Re: Lack of flow due to dodgy vessel
« Reply #1 on: March 29, 2019, 10:15:20 pm »
Back in the day I seem to remember flow issues when di vessels were on the van usually at the start of the day where it seemed to take a while to pressurise - but it’s been a few years since I’ve needed di on the van

Darran
Logged
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

֍Winp®oClean֍

  • Posts: 1687
Re: Lack of flow due to dodgy vessel
« Reply #2 on: March 29, 2019, 10:53:38 pm »
It's usually the strainer that's blocked. Check the one before your pump and also any within the vessel i.e. on the riser tube/internal head assembly. If I ever get poor flow issues it's always the pump strainer.
Logged
Comfortably Numb!

NWH

  • Posts: 16952
Re: Lack of flow due to dodgy vessel
« Reply #3 on: March 29, 2019, 11:21:31 pm »
I don’t use a strainer I haven’t yet checked the vessel head properly but after the pump I do have a couple of L shaped bends that Grippatank fitted to get round the exhaust box on my heater,I did wonder whether it could be that.
Logged
Pages: [1]