Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Dave Willis

3/4" to 1/4" Alex?
« on: September 26, 2016, 04:00:46 pm »
Just purchased a seven litre deionizing vessel with 3/4 inch ports. I want to take it down to 1/4" push fit.

Can't spot them on the website - do  I need four parts to bodge it? Seem to remember it was an expensive way to go years ago but can't remember which bits are required.

Ta

Alex Gardiner

  • Posts: 7740
Re: 3/4" to 1/4" Alex?
« Reply #1 on: September 26, 2016, 04:17:41 pm »
Just purchased a seven litre deionizing vessel with 3/4 inch ports. I want to take it down to 1/4" push fit.

Can't spot them on the website - do  I need four parts to bodge it? Seem to remember it was an expensive way to go years ago but can't remember which bits are required.

Ta

Hi Dave

The DI Vessel you bought has 1" ports.

You would need the following items to make each port  fit 1/4" John Guest tubing:

1" to 3/4" Reducing bush -  http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/fittings-barbs-adapters-etc/screw-thread-fittings/female-to-male-reducing-bush.html

3/4" to 3/4" screw thread fitting - http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/fittings-barbs-adapters-etc/screw-thread-fittings/male-to-male-connector.html

http://gardinerpolesystems.co.uk/all-products/pump-hose/hose-fittings-adapters/john-guest-fittings/1-4-fittings/john-guest-outside-tap-a-to-a-push-fit-adapter.html

It is rare for someone to want to use 1/4" tubing on a large vessel like this - hence the multiple fittings needed.




Dave Willis

Re: 3/4" to 1/4" Alex?
« Reply #2 on: September 26, 2016, 04:45:41 pm »
Good spot. Yes, for some reason I've had quarter inch for nearly ten years, I guess whoever supplied my very first unit (not you) must have thought it was the thing to do.
Cheers, will order some more bits.



Dave Willis

Re: 3/4" to 1/4" Alex?
« Reply #5 on: September 26, 2016, 08:17:58 pm »
Ordered (hope I got it right) Alex, did I get the last one with 1" ports? They are listed as 3/4" today - am I going nuts?

Alex Gardiner

  • Posts: 7740
Re: 3/4" to 1/4" Alex?
« Reply #6 on: September 26, 2016, 08:37:06 pm »
Ordered (hope I got it right) Alex, did I get the last one with 1" ports? They are listed as 3/4" today - am I going nuts?

Your order is exactly right.

You did order our last 1" port DI vessel in stock. The website then switched to the alternative 3/4" port items until we have the next batch of 1" port vessels in.

You are not going mad this time  ;D

Dave Willis

Re: 3/4" to 1/4" Alex?
« Reply #7 on: September 26, 2016, 09:45:47 pm »
Thanks Alex.  :)