Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

JSMC

  • Posts: 3511
flashing P and L on vatistream
« on: April 12, 2016, 04:12:01 pm »
I think adjustments need to be made for pressure to begin with but unsure what the L is for. I will chrck battery but had a full charge over weekend.

Clever Forum Name

  • Posts: 5942
Re: flashing P and L on vatistream
« Reply #1 on: April 12, 2016, 04:39:11 pm »
L means low battery

Smurf

  • Posts: 8538
Re: flashing P and L on vatistream
« Reply #2 on: April 12, 2016, 04:49:47 pm »
Here is the user manual for the vsd6 if you have the same one that might help

JSMC

  • Posts: 3511
Re: flashing P and L on vatistream
« Reply #3 on: April 12, 2016, 05:03:10 pm »
Unsure what model this one is. 

Puzzled why battery is low after full charge. All my work is mainly trad on shops. Poles are used but surely battery is not done after 14 months?

matthewprice

  • Posts: 758
Re: flashing P and L on vatistream
« Reply #4 on: April 12, 2016, 05:20:38 pm »
I would look at connections had same happen cleaned or replaced connections all worked fine after

JSMC

  • Posts: 3511
Re: flashing P and L on vatistream
« Reply #5 on: April 12, 2016, 05:52:11 pm »
Sorted connections other month with new connector blocks n should still be ok

Spruce

  • Posts: 8463
Re: flashing P and L on vatistream New
« Reply #6 on: April 12, 2016, 06:44:36 pm »
L = the voltage of the battery is dropping to 11.5v under load.

It could indicate that the battery needs replacing. Whenever we have had issues with a failing leisure battery, they have always shown up as fully charged. What happens is the the battery lost its capacity and started to go flat once that reduced capacity was exhausted.

The battery started off as expected but would 'die' a few hours into the work schedule. So a 110 amph leisure battery ended up with a capacity of 20 amph.

From a discharged state we noticed they they very quickly became fully charged.

It could also be a bad connection as has been posted by others. The first place to check is at the fuse holder. If it gets hot then there is a resistance - a resistance causes a current restriction and reduced voltage.
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)