[richywilts]

Cleaned customer conny today came up great but customer sent these images is there anyway you can clean these with out removing from roof etc or is it easier to just replace them

[Smurf]

Not worth the hassle even thinking of trying as the panel would have to be removed from the roof first and that in itself would be no easy task to do. Then there would be no guarantee you would get them clean..

[CleanClear]

Not worth the hassle even thinking of trying as the panel would have to be removed from the roof first and that in itself would be no easy task to do. Then there would be no guarantee you would get them clean..

Blow down them with a straw !!!   

[Smurf]

Roof blinds springs to mind 

[samson]

That panel is defective and one end of the panel seal has failed, so needs replacing, which is not an expensive job.

[slap bash]

I have done one just like this before. You will need to remove the panel by lifting the strips holding the panel in the remove the tape surrounding the panel. Flush out the channels with a hose leave the panel dry in the sun and replace the alu tape and put the panel back on the structure and replace the holding strips with a  plastic mallet.

[samson]

I have done one just like this before. You will need to remove the panel by lifting the strips holding the panel in the remove the tape surrounding the panel. Flush out the channels with a hose leave the panel dry in the sun and replace the alu tape and put the panel back on the structure and replace the holding strips with a  plastic mallet.

Easier to fit a new panel 

[slap bash]

You chaps a spoilt all you want is easy money. No shame.  Send all those to me its easy money with no competition.