Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Robin Ray

Electro Storm
« on: June 15, 2015, 01:52:34 pm »
My new motor arrived today so I can convert the Airflex Pro in to an Electro Storm, or the same motor set up as a Storm with the Electro Motors or an Alltec Evolution. I will be interested to see if I notice any difference in power. In theory it will give me 14 more cfm and 27 more inches of lift not a great deal but every little helps.

fibresafe

  • Posts: 114
Re: Electro Storm
« Reply #1 on: June 15, 2015, 04:11:09 pm »
Which model Electro motor are you using?

Robin Ray

Re: Electro Storm
« Reply #2 on: June 15, 2015, 05:02:21 pm »
Q6600-049A-MP

110.3 cfm
148.8" water lift

Lewis Newby

  • Posts: 353
Re: Electro Storm
« Reply #3 on: June 15, 2015, 05:31:57 pm »
Robin, will it run off the one cord or are you adding another cord?

Robin Ray

Re: Electro Storm
« Reply #4 on: June 15, 2015, 05:53:07 pm »
I'm going to use 1 cord and see how I get on. I know its over the limit however I have a gutter vacuum which is 3600 w that will draw 15 amps and I have never had a problem with it in about 8 years. I know that John Martin has also tried it with no problems. I am going to fit it all up in a couple of hours and try it out so I should find out if there are any problems.

Lewis Newby

  • Posts: 353
Re: Electro Storm
« Reply #5 on: June 15, 2015, 05:57:21 pm »
Good stuff mate, is this motor the HD electro to match what you have?

I wondered if they used the bigger 1800w electro in the storm etc

john martin

  • Posts: 2699
Re: Electro Storm
« Reply #6 on: June 15, 2015, 07:14:00 pm »
Good stuff mate, is this motor the HD electro to match what you have?

I wondered if they used the bigger 1800w electro in the storm etc

They definitely should be using the 8.5 amp version in a two cord storm  .

john martin

  • Posts: 2699
Re: Electro Storm
« Reply #7 on: June 15, 2015, 07:17:47 pm »
I'm going to use 1 cord and see how I get on. I know its over the limit however I have a gutter vacuum which is 3600 w that will draw 15 amps and I have never had a problem with it in about 8 years. I know that John Martin has also tried it with no problems. I am going to fit it all up in a couple of hours and try it out so I should find out if there are any problems.

yeah , its no problem . As a precaution  I do change my plug every two months or so ...  the 13amp slow burn fuse runs a bit warm at 15amps and the heat buildup on the fuse terminal can blacken it speeding up the heating process .  I find it easy to just stick a new plug on .  I meant to source a 15amp fuse or make to stop that .

Robin Ray

Re: Electro Storm
« Reply #8 on: June 15, 2015, 09:05:10 pm »
Well the conversion is complete. I can't actually feel any difference at all. I suppose the real test will be using it.

Robin Ray

Re: Electro Storm
« Reply #9 on: June 19, 2015, 10:19:10 pm »
Well  i have been using it  and it doesn't blow any trips. It definitely has more pull. As for dry times it is difficult to tell. I would be happy using it at 100 ft no probs.