Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Matt Gibson

  • Posts: 2482
FSC technique...
« on: April 16, 2015, 01:35:49 pm »
Righto guys, been back to a few jobs i did last year. People were happy with results but noticed a few darker stripes from my previous clean. Not on every job just a couple. Regularly change fsc nozzles and bar when it needs it. I keep it greased.
Just wondering about my overlap technique. Which way do you overlap? First pic or Second pic




Matt Gibson

  • Posts: 2482
Re: FSC technique...
« Reply #1 on: April 16, 2015, 01:36:36 pm »
Sorry ab9ut the size of the pics. Uploaded from my phone..

chris scott

  • Posts: 3414
Re: FSC technique...
« Reply #2 on: April 16, 2015, 02:17:37 pm »
Some surfaces just end up like that…nothing you are doing  is wrong.
I call them "clean stripes" …it's how flat surface cleaners -clean. A little wash with bleach at the end of the job evens things out.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Matt Gibson

  • Posts: 2482
Re: FSC technique...
« Reply #3 on: April 16, 2015, 02:49:46 pm »
The jobs look great when im finished them, no stripes 5he day i do them, just seems like some bits dont get as clean as other bits and get dirty quicker. But you can only notice it months after.

Just curious if people overlap half the fsc or move the fsc all the way over for the next pass. Does it make a different? Im guessing it does.

Richy L

  • Posts: 2257

wpclean

Re: FSC technique...
« Reply #5 on: April 16, 2015, 06:05:59 pm »
I had this the other day, but as said above after the Hypo they vanished as if by magic !     

Rob@Blast off

  • Posts: 875
Re: FSC technique...
« Reply #6 on: April 16, 2015, 07:04:50 pm »
I tend to overlap like the second pic going up and down then go side to side with the lance but still get the odd mark.

Mike Halliday

  • Posts: 11581
Re: FSC technique...
« Reply #7 on: April 17, 2015, 03:28:03 pm »
I tend to wash down with a turbo lance which I use in a figure of eight motion to even out any stripes plus like has been suggested a bit of hypo will even out the stripeiest clean
Mike Halliday.  www.henryhalliday.co.uk

Jettaway

  • Posts: 521
Re: FSC technique...
« Reply #8 on: April 19, 2015, 06:57:43 pm »
I tend to line up  the silver arm that goes into the yellow lid with the line of the unclean area.

tony braid

  • Posts: 99
Re: FSC technique...
« Reply #9 on: May 09, 2015, 10:11:27 am »
Hi guys listening to some of your comments on this forum I here this product hypo where can you purchase this product from
Regards Tony