[Dannymackreturn]

Hi chaps what's the best way to fill a 25L resin vessel, where do yous pour the old resin as I've never had to do this

Thanks for any comments 👍

[Tom White]

I do mine just like this guy:

https://www.youtube.com/watch?v=gWR8Nsf_Z_g

[Dannymackreturn]

Cheers Tosh wasn't sure if to put water in to make the plastic filter stick go in easy !!!
Ill try it that way nice one

[andyM]

I prefer to put dry resin into a bucket or washing up bowl, add water and then pour straight into the top of the resin vessel.

[dazmond]

i use a funnel and pour it in dry to about 3 quarters full then fill with a bit of water,more resin,then screw lid on.job done.

[Martin-Swinscoe]

i use a traffic cone 

[richard groves]

I prefer to put dry resin into a bucket or washing up bowl, add water and then pour straight into the top of the resin vessel.

+1
Only realised this myself about a year ago
So much quicker, simpler and less messy

[LWC]

Made this vid a while ago

https://www.youtube.com/watch?v=j1TocCGTRRw

Im well aware i spilt some by way lol, i was filming and pouring 

[Dannymackreturn]

Thanks for info. I was using the Omnipole filters where the last bottle was a spectrum sealed resin bottle so no need to use lose resin but they was quite expensive. Changed the system and bought the 25L Di vessel filled it up about year & half ago, the way I filled it was fill near to the top leaving around 4 inches but pour in dry using a small cone they was easy, then I had to push the plastic stick thing down which wasn't to bad until the last bit was really hard but managed it in the end. I gotta now change it which never done but will have ago filling half pouring water in then more resin hopefully should be easier to push plastic rid in !!!👍

[Perfect Windows]

If you're having trouble getting the plastic tube through the resin, blow down it.  It makes a bubble of air in the resin at the bottom and you can move it down an inch or two.  If you have the lid on top of the tube, then it's the "out" hole you need to blow down.  Repeat.

Vin

[Dannymackreturn]

Cheers Vin with give that ago if it don't work ill put se pure water in resin 👍