Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

j timms

  • Posts: 113
Spotting
« on: May 16, 2014, 07:59:20 pm »
What can I do to stop spotting in the sun. I'm cleaning frames rinsing , then cleaning glass and rinsing but the windows directly in sun are still spotting and beading. Water is 002 .
 :'( :'(

AuRavelling79

  • Posts: 25288
Re: Spotting
« Reply #1 on: May 16, 2014, 08:01:37 pm »
Clearasil.

Seriously - what flow rate, what type of seals what type of jets?
It's a game of three halves!

j timms

  • Posts: 113
Re: Spotting
« Reply #2 on: May 16, 2014, 08:21:49 pm »
Penci jets, flow rate 40, rubber seals .

ben M

  • Posts: 4720
Re: Spotting
« Reply #3 on: May 16, 2014, 08:43:04 pm »
rinse more when hot day.

Chris - CBWC

  • Posts: 224
Re: Spotting
« Reply #4 on: May 16, 2014, 08:55:03 pm »
SeanK may be along in a bit but he just put this on another thread that may help:

"When cleaning a window with rubber seals rub a damp microfiber along the rubber and if
it leaves black marks then its going to cause problems.
What you need to do with these is make sure you don't leave any water beads on the rubber.
Scrub and rinse along the rubber then scrub and rinse the rest of the window, go back to the top
and rub the brush along the rubber to remove any water beads and then rinse again from about two inches
below. "

Smudger

  • Posts: 13433
Re: Spotting
« Reply #5 on: May 17, 2014, 06:05:22 am »
Any rubber seal that leaves marks as described treat with g101 scrub without water flow for 30 seconds then scrub and rinse,  it will flow black for a minute or so then you'll get clear water, none of the black will stick to the frame while ringing off, the rubber will never leech black again while your doing a regular clean on them

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

8weekly

Re: Spotting
« Reply #6 on: May 17, 2014, 07:27:24 am »
Any rubber seal that leaves marks as described treat with g101 scrub without water flow for 30 seconds then scrub and rinse,  it will flow black for a minute or so then you'll get clear water, none of the black will stick to the frame while ringing off, the rubber will never leech black again while your doing a regular clean on them

Darran
I will try that.

SeanK

Re: Spotting
« Reply #7 on: May 17, 2014, 08:07:28 am »
Smudger will give that a try myself.
Do you spray it on the brush to apply?
Cheers.

j timms

  • Posts: 113
Re: Spotting
« Reply #8 on: May 17, 2014, 08:13:27 am »
Seems like a lot of hassle to me. Think I might just trad the jobs that spot.

H20cleaning

  • Posts: 2098
Re: Spotting
« Reply #9 on: May 17, 2014, 01:45:42 pm »
The only time i have ever had spotting is when my water was above 005.
Other than that i would suggest either your technique or the sills are ruined, unless your brush head is contaminated

Smudger

  • Posts: 13433
Re: Spotting
« Reply #10 on: May 17, 2014, 05:52:12 pm »
No spray onto window/frame use a plant sprayer ( we use the 1.25 ltr hozelock )

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience