[mr muzzy]

hi is there anyone on here that's has a magma heater
and can tell me if there any good was thinking about getting one cheers

[Richard Cole]

Yes i have one and it is good.  I only put warm not hot water in tank to avoid damage to pump and you can get really hot water / steam out at the wand. Don't use it on all jobs if only lightly soiled but is good on heavily soiled carpets. Not had any problems so far, brought my second hand but it had only been used a few times.

[mr muzzy]

know what you mean about your pump ,
to hot water kills them
will the magma stay hot for the full job
thanks

[jim mca]

That will depend on your flow rate, psi and how quick you work when I need a boost I slow down a bit

[Richard Cole]

Yes will stay hot if you use it as instructions, see Cleansmart website for info, basically 4 wand strokes followed by 4 dry strokes.

[neil 47]

Yes i have one and it is good.  I only put warm not hot water in tank to avoid damage to pump and you can get really hot water / steam out at the wand. Don't use it on all jobs if only lightly soiled but is good on heavily soiled carpets. Not had any problems so far, brought my second hand but it had only been used a few times.

I agree with richard , cold water its hotish but with warm water its steaming

[Richard Meads]

I had one for a while, but it started leaking, it went for repair but was soon leaking again.  I was using the heater in the machine and then putting it through the magma  , and that apparently was what was making it leak.

[mr muzzy]

thanks very much lads