[Griffus]

Not sure if this is what it's called but I need a plastic fitting to change the inlet on a our ISSA wet vac.

I want to connect 2" hose directly.

On our Alltec Advance I have a 2" dark grey plastic fitting.   This is barbed on the outside to take the hose with a screw thread on the other end which is tightened to the inside of the tank. 

Can anyone post a link to something similar?

Thanks in advance.

[john martin]

  This is the threaded barb  ...  but do you need the bulkhead fitting too to screw it to ?
 
   http://www.carpetcleanersstore.co.uk/product/t2c2

[Griffus]

  This is the threaded barb  ...  but do you need the bulkhead fitting too to screw it to ?
 
   http://www.carpetcleanersstore.co.uk/product/t2c2

Hi John, excellent thanks.

Yes, I do need the bulkhead too. I can't see it on the site, do you have a link for one also?

Thanks again

Ian

[john martin]

   
  I  was looking myself a while back and couldn't decide what was suitable  ....
  Im not sure if a regular plumbing store would have them  ,   Im also not sure if that barb is npt or bsp thread ..  as many of these carpet fittings come from the USA .

  There is some bulkheads here on tanksdirect  ...
http://www.tanks-direct.co.uk/bsp_tank_fittings

 also you could google the koi fish tank stores online ... 
  Its possible some of the manufacturers , Ashbys etc would supply the whole kit also
  or contact the guy on the selling the barb .

 If you find  anything let us know , thanks .

[Griffus]

Hi John, ironic as it is I have ended up at the beginning.

When I decided to do this I first spoke to Dual Pumps.

Looks like I'll end up back with them.

I think you're right about the American thing.   Everytime I found what looked to be what I wanted it was over there.

Thanks for your help.

http://www.dualpumps.co.uk/files/pdf/products/Parts%20Lists%20%28pdf%29/Banjo/BAN%20TF%20PARTS%20LIST.pdf

[john martin]

Bit late perhaps ...   

 This seller on ebay has all the necessary fittings ...

http://www.ebay.co.uk/itm/2-Male-BSPP-2-Male-BSPP-Threaded-Tank-Connector-Polypropylene-/360709115771?pt=UK_HomeGarden_Garden_PondsWaterFeatures_UK&hash=item53fbf04f7b

http://www.ebay.co.uk/itm/Hose-Fitting-50-mm-2-Female-BSPP-Hose-Adaptor-Polypropylene-/231025453501?pt=UK_HomeGarden_Garden_PondsWaterFeatures_UK&hash=item35ca30a9bd



On a separate subject ....   fools of  CT  .. i know some of u are here

Stop talking trash about  motors without doing your research 

The 6.6 has Nothing over the 8.4 

The only reason you are not getting it is because the machine selling price would have to increased to the point where it is uncompetitive and it would look even more foolish against something like an Enforcer .


http://www.centralvacuummotor.com/Product%20Bulletin/122178-18.pdf

http://www.centralvacuummotor.com/Product%20Bulletin/122236-18.pdf