[Russ Chadd]

What are your experiences on this subject ?
Over the years i have tried many brands of stain protectors on all different surfaces, i am currently using Solutions "Protect nano" this has a dilution of 1:1, even though the instructions state that a particular very fine T jet be used with it... i seem to get better coverage using an 8002 on carpet and a 8001 on fabric.
High % wool carpets seem to perform better to water repellency than synthetic carpet treated wit the same product.

Also what products have you used which offer the best long term performance?

[Kevin OBrien]

Russ did you use the Recomended jet? I have bought Nano and the recomended Jet  but not got around to use it yet,also how long did you leave before back in use

Thanks in advance

[Paul Redden Countryfresh]

I used the recommended jet with nano but found the fan width very narrow ok for fabric
but too time consuming for carpet. A inlet strainer with such a fine jet would help clogging.

[Russ Chadd]

Chemspec recommend a 8004 for their protector.

[V_Purcell]

Chemspec recommend a 8004 for their protector.

Take into account what the psi is, as 80 is the fan size and the 04 s the jet size, now if you increase the psi you increase your flow rate of chemical solution.

[Russ Chadd]

Chemspec recommend a 8004 for their protector.

Take into account what the psi is, as 80 is the fan size and the 04 s the jet size, now if you increase the psi you increase your flow rate of chemical solution.

The pressure is going to be around 50 psi max... That's about all a pump up sprayer like a Gloria will give

[V_Purcell]

Are you guys still using pump up sprayers ?