Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Aztec Services

  • Posts: 32
ashby's ninja
« on: September 11, 2013, 10:29:51 pm »
Hi all

need some advice will be installing 2 x 1500 watt ametex lamb motors no.117123-13 in my ashby's ninja and have purchased 2 foam gaskets from woodbridge commercial however the gaskets are about 60mm thick are they all this thick.



many thanks
paul condon aztec services
Logged

john martin

  • Posts: 2699
Re: ashby's ninja
« Reply #1 on: September 11, 2013, 10:42:33 pm »

 Chances are it will compress as you tighten the bolts  ...  but better thick than thin , u can always cut it in two .
Logged

Aztec Services

  • Posts: 32
Re: ashby's ninja
« Reply #2 on: September 11, 2013, 11:01:43 pm »
sorry i made a mistake the gasket is about 20mm thick not 60mm



paul condon aztec services
Logged

John Kelly

  • Posts: 4461
Re: ashby's ninja
« Reply #3 on: September 12, 2013, 07:59:51 am »
Should be fine. Don't make the common mistake of over tightening the bolts as this can compress the bottom causing the fan blades to rub creating wear and heat.
Logged
Pages: [1]