Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

derikraven

  • Posts: 331
Ninja tripping
« on: June 26, 2013, 06:19:46 pm »
here's a wee problem that has me beat. I can run vac one all day no problem. I can run vac two all day no problem. If I try to run both vacs at the same time, nine times out ten , the electrics trip. Anyone got any ideas?

Derik   :-\
Logged

nigel h

  • Posts: 8
Re: ninja tripping
« Reply #1 on: June 26, 2013, 07:31:42 pm »
pulling to many amps from electric circuit......need to plug leads into seperate circuits.
Logged

JandS

  • Posts: 4272
Re: ninja tripping
« Reply #2 on: June 26, 2013, 07:41:30 pm »
If it does it at every property something wrong with electrics.
Do you keep the heater plugged in whilst running machine?
I always unplug heater when starting then switch back on when I stop.
Logged
Impossible done straight away, miracles can take a little longer.

wynne jones

  • Posts: 2918
Re: ninja tripping
« Reply #3 on: June 26, 2013, 09:03:35 pm »
When I had a ninja I had no problem for ages running everything but the two times I did it was one of the flexes on the way out.
Logged
It's not expensive, you just can't afford it.

derikraven

  • Posts: 331
Re: ninja tripping
« Reply #4 on: June 27, 2013, 05:57:29 am »
thanks to all for taking the time to reply

Derik    :)
Logged

Phillip Mold

  • Posts: 594
Re: ninja tripping
« Reply #5 on: June 27, 2013, 07:29:38 am »
Tried switching them one one at a time?
My Ninja will sometimes trip the electrics unless I do this
Logged
Doing the best job in the world as well as I can

Paul Redden Countryfresh

  • Posts: 773
Re: ninja tripping
« Reply #6 on: June 27, 2013, 10:36:36 pm »
I would renew mains flex and plug, not expensive and eliminates from equation
Logged
"So basically its a big vax!"

James Jacob

  • Posts: 148
Re: Ninja tripping
« Reply #7 on: July 21, 2013, 07:56:48 pm »
Open up the ninja & write down the specs & serial numbers of each vac motor... then google search or go to ebay & type it in & see what it comes up with... If both motors turn out to be 1500w theres your problem... as one should be 1500w & the other should be 1200w... Also if they seem to be correct then consider the other posts as good advice too as part of your process of elimination.  :)
Logged
Pages: [1]