[beefy]

excuse the ignorance again but ive just come across this expression of 'dog earing' could someone explain it please

[gaza]

THIS was new to me till I came on this site,and it does work,bend the
end of your squezze bar over a little, better still click on search
and the topic with pictures should come up

 gaza

[Peter Fogwill]

Turning the corners of the squeegee down towards the rubber to stop the rubber riding up over the mouldings, and leaving a trail of soap behind.

Peter

[beefy]

thanks lads, cant open any of pics tho, is there something i need on pc to do this

[rah]

Beefy

are you running an anti virus programme, i had the same problem on Autotrader, you need to adjust the settings within the programme (add blocking), well thats if you are using one.

rob.

[dai]

Yes, just bend the corner of your channel over untill it just touches the rubber.
Make sure that your rubber only just protrudes from the end of your channel or it won't work. Dai

[D.Salkeld_Ltd]

Also, cut the rubber at a slight angle outwards..........
Works a treat

David

[beefy]

thanks  lads will try tomorrow on a spare channel,saw lad who taught me to w/c today he been w/c for 19yrs & never heard of it or gg3 or half the things that get mentioned . this really is a good site. i always thought cumbria was nerve centre of universe, wrong again i'll get back to my sheep

[KJG]

If anyones interested, here's how customize my squeegees.

The channel ends are cut off at an angle. This gets the squeegee right into corners on deep recess windows without having to line it up with the frame.

I don't 'dog ear' but I do very slightly bend the whole channel which gives the same result.

On the handle, I bend the bit that holds the channel out a bit so it's less claw shaped. This lets you finish off perfectly again on deep recess windows. The only problem with the last bit is that it isn't suited to pole work where the 'claw' comes in handy. I use a standard handle for that.

[L.Doubtfire - The Blade Runner]

Hi `beefy`,can you clarify or otherwise this.With the channel cut an angle
Do you have your rubber `flush` or set over the end of the channel? What
Depth angle is the channel cut at.I`m just wondering if what your meaning
And doing is something similier I came to the group with a couple of years
Ago but your idea might be an improvement.The idea I sent in only really
Works to the best advantage on modern upvc windows where there are
Mouldings.I`ve always thought that cleaning windows with channels that
Have been `dog-eared`on modern upvc frames is`nt being done to the best
Advantage because the rubber has to be set over the end of the channel.The
Whole operation defeats the purpose of `dog-earing`.

[beefy]

spent some time swearing & bending this morning not having seen a pic it was mostly guess work but end result seems to work very well. in fact i ended up working all day just to play with my new toy so ta very much to all.

 for L.doubtfire. sorry.  dont understand the channel cutting bit myself
just been tring to find out about dog earing