[concept]

Got a P5 error message on streamline controller, any ideas?

Cheers

[colin purewater]

Is it not ps? As in pressure switch

[concept]

Replacement needed or anything can be done to fix?

[Mike #1]

Controller should be fine happened to me the other week ,

Basically pressure has built up to the max and causes pump to cut out either hose was nipped or you have or had air in your system .

I had drawn air into pump and hose when tank was low and had been driving around happened once and has been fine ever since . Mike

[Ian Sheppard]

Got a P5 error message on streamline controller, any ideas?

Cheers

This link may help
http://www.springltd.co/node/48

The controller displays PS - Pressure switch. The controller is advising that the pump pressure switch has activated. Normally due to high pressure build up in the system or in some cases it may be a loose connector between the pump and controller.

[concept]

Thanks all for the replies, cleared itself after a bit of playing about...operator cant say what specifically sorted it, but its sorted.

Cheers!

[Ian Sheppard]

Good to hear that has helped. Most often the explanation is a straight forward one. Did the resource on the web site help? I am aiming at having a range of FAQ so anything that is not there let me know.

[concept]

It certainly would've helped!

He got it sorted before I could look.