Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

paul13

  • Posts: 491
Builders clean
« on: September 09, 2012, 05:49:58 pm »
I am doing a builders clean tomorrow outsides are covered in cement along
with the expected dirt and grime was wondering how every one else would
approach this?
I normally will go over all windows with wfp very lightly first then go back
over with ladders, using scraper and traditional for cement then go back over ever thing
again with wfp is there a better way for lifting cement of glass?
Would I be better just going over everything  traditional to start with?
Has any one got a must have chemical for builders clean?
 

TomCrowther

  • Posts: 1965
Re: Builders clean
« Reply #1 on: September 09, 2012, 06:01:11 pm »
I had a bad experience with a builders clean and vowed never to do one again. Get them to sign a disclaimer re scratches. Once clean, any scratches will be very visible and the normal course of action is to blame the wc.

colin purewater

  • Posts: 2282
Re: Builders clean
« Reply #2 on: September 09, 2012, 06:09:29 pm »
Trad em. Big scraper and away ye go
keep it simple

paul13

  • Posts: 491
Re: Builders clean
« Reply #3 on: September 09, 2012, 06:13:03 pm »
Thanks guys.
Was thinking of using warm tap water first does any one know if putting warm/hot'ish
water through a backpack would affect the pump.

britishwill

  • Posts: 536
Re: Builders clean
« Reply #4 on: September 09, 2012, 06:23:30 pm »
I too will now never do builders cleans again. They are too much hassle, but I would suggest wtp first then trad/scraper as it will get all the dust off then you can detail the windows for cement snots.
You must get a scratch waiver first, this in my opinion is a must as every builders clean I have done has had scratches left from builders or suppliers. I always point them out as we go and explain its their liability and also gauge their reaction to see if they are at all bothered or if you think they are going to be a pain in the arse.
Best of luck

seamus campbell

  • Posts: 211
Re: Builders clean
« Reply #5 on: September 09, 2012, 08:33:04 pm »
Did one or two. never again, absolutly horrible soul destroying work which the customer expects to be done for about £50

keyser soze

  • Posts: 1694
Re: Builders clean
« Reply #6 on: September 09, 2012, 11:49:35 pm »
i also have got one to do but thinking of giving it a miss tbh i tried to clean 2 frames it took a hour and half to get them looking ok . only 40 more to do but based a price on what it took to do the 2 ive done already . soul destroying work . i used a scraper and tradded them wfp is next to useless

steve rix

  • Posts: 816
Re: Builders clean
« Reply #7 on: September 09, 2012, 11:55:53 pm »
 wfp is next to useless
 :o :o :o

P @ F

  • Posts: 6319
Re: Builders clean
« Reply #8 on: September 10, 2012, 12:49:56 am »
I used to do it full time for all the big boys , persimons , wimpey and the like , get a scratch waiver as said above as they will stuff you big time , and trad is the only way in my view , lots of soapy hot water , let it soak into the crud , and use only quality blades and change regularly.

Good luck , not my cup of tea anymore .

Rich 
I'm so lazy I'm getting tired of it !