Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

jayjackson

  • Posts: 36
help needed with flipback
« on: October 25, 2005, 09:20:34 pm »
Hi,
I'm having problems with streaking when using my Unger back flip/viseversa
on pole....

Wanted to limit ladder use, but having to go up to detail :'(
Only new to shining, so any help would be appreciated.

Thanks

Jay
London, Greater London, England, UK

Ben Walker

Re: help needed with flipback
« Reply #1 on: October 26, 2005, 12:20:24 am »
is that a gorrilla cleaning a dorma?

coool  ;D



who needs a back flip when you have recruits like that!

Ben Walker

Re: help needed with flipback
« Reply #2 on: October 26, 2005, 12:28:27 am »
sorry

no, seriously, my only limited experience tells me that it is difficult to avoid streaking with using long pole as it is difficult to keep even/ firm enouugh presure on the squeegee.
i do the best i can then wrap scrim over squeegee then rub over area i missed b4 it dries.

maybe the others know better
ben

jayjackson

  • Posts: 36
Re: help needed with flipback
« Reply #3 on: October 26, 2005, 09:44:41 am »
Thanks Ben,

Will give it a try today. Hopefully it'll work.

London, Greater London, England, UK

Bob McKillop

  • Posts: 53
Re: help needed with flipback
« Reply #4 on: October 26, 2005, 11:05:33 am »
Very hard to avoid streaks when using extension pole, but  I use a dry 8" applicator with damp Tesco microfibre cloth wrapped around it to rub streaks/edges that you miss with squeegee

Terry_Burrows

  • Posts: 1643
Re: help needed with flipback
« Reply #5 on: October 26, 2005, 02:04:16 pm »
 ;)I have found the Ettore back flip the best,its heavy enough at the top!thats where you need pressure,a new blade is Important when you use the backflip,bad blades are a nightmare with this tool,practice with this its a great tool a must in ya bucket! ;)
WWW.FASTESTWINDOWCLEANER.CO.UK
GUINNESS WORLD RECORD HOLDER
BURNING RUBBER FASTER!
NATIONAL FEDERATION OF MASTER WINDOW CLEANERS.

ian m

  • Posts: 136
Re: help needed with flipback
« Reply #6 on: October 26, 2005, 02:10:01 pm »
I sometimes use a backflip on the pole. Dog earing ( slightly bend each end of the channel with a pair of pliers)  will reduce the lines you can leave behind.

Also a fixiclamp can be useful for use with your scrim

regards

Ian
I know you are out there....... I can hear you breathing

Re: help needed with flipback
« Reply #7 on: October 26, 2005, 08:38:28 pm »
Is there much difference apart from price between unger backflip and etore backflip?

Terry_Burrows

  • Posts: 1643
Re: help needed with flipback
« Reply #8 on: October 26, 2005, 08:42:36 pm »
I find the Ettore is very nicely balanced,they have gave this a lot of thought ;Dthey did break at the neck but they have renforced this now,and its a puka tool ;D
WWW.FASTESTWINDOWCLEANER.CO.UK
GUINNESS WORLD RECORD HOLDER
BURNING RUBBER FASTER!
NATIONAL FEDERATION OF MASTER WINDOW CLEANERS.

Re: help needed with flipback
« Reply #9 on: October 26, 2005, 08:49:08 pm »
Thanks terry

dai

  • Posts: 3503
Re: help needed with flipback
« Reply #10 on: October 26, 2005, 09:09:14 pm »
I use the backflip with a pole to do windows up to 10 ft. I havn't tried going higher. I use the applicator first wipe the blade and come down from top to bottom. The blade needs a wipe after each stroke unless you have nice wooden frames to run the edge of the blade on. The only problem I'v had is with reaching the very bottom of the top pane when the frames are deeply recessed and the windows are made up of panes one above the other. Dai